Netlink interface for ethtool¶

Basic information¶

Netlink interface for ethtool uses generic netlink family ethtool (userspace application should use macros ETHTOOL_GENL_NAME and ETHTOOL_GENL_VERSION defined in <linux/ethtool_netlink.h> uapi header). This family does not use a specific header, all information in requests and replies is passed using netlink attributes.

The ethtool netlink interface uses extended ACK for error and warning reporting, userspace application developers are encouraged to make these messages available to user in a suitable way.

Requests can be divided into three categories: “get” (retrieving information), “set” (setting parameters) and “action” (invoking an action).

All “set” and “action” type requests require admin privileges (CAP_NET_ADMIN in the namespace). Most “get” type requests are allowed for anyone but there are exceptions (where the response contains sensitive information). In some cases, the request as such is allowed for anyone but unprivileged users have attributes with sensitive information (e.g. wake-on-lan password) omitted.

Conventions¶

Attributes which represent a boolean value usually use NLA_U8 type so that we can distinguish three states: “on”, “off” and “not present” (meaning the information is not available in “get” requests or value is not to be changed in “set” requests). For these attributes, the “true” value should be passed as number 1 but any non-zero value should be understood as “true” by recipient. In the tables below, “bool” denotes NLA_U8 attributes interpreted in this way.

In the message structure descriptions below, if an attribute name is suffixed with “+”, parent nest can contain multiple attributes of the same type. This implements an array of entries.

Attributes that need to be filled-in by device drivers and that are dumped to user space based on whether they are valid or not should not use zero as a valid value. This avoids the need to explicitly signal the validity of the attribute in the device driver API.

Request header¶

Each request or reply message contains a nested attribute with common header. Structure of this header is

ETHTOOL_A_HEADER_DEV_INDEX

u32

device ifindex

ETHTOOL_A_HEADER_DEV_NAME

string

device name

ETHTOOL_A_HEADER_FLAGS

u32

flags common for all requests

ETHTOOL_A_HEADER_PHY_INDEX

u32

phy device index

ETHTOOL_A_HEADER_DEV_INDEX and ETHTOOL_A_HEADER_DEV_NAME identify the device message relates to. One of them is sufficient in requests, if both are used, they must identify the same device. Some requests, e.g. global string sets, do not require device identification. Most GET requests also allow dump requests without device identification to query the same information for all devices providing it (each device in a separate message).

ETHTOOL_A_HEADER_FLAGS is a bitmap of request flags common for all request types. The interpretation of these flags is the same for all request types but the flags may not apply to requests. Recognized flags are:

ETHTOOL_FLAG_COMPACT_BITSETS

use compact format bitsets in reply

ETHTOOL_FLAG_OMIT_REPLY

omit optional reply (_SET and _ACT)

ETHTOOL_FLAG_STATS

include optional device statistics

New request flags should follow the general idea that if the flag is not set, the behaviour is backward compatible, i.e. requests from old clients not aware of the flag should be interpreted the way the client expects. A client must not set flags it does not understand.

ETHTOOL_A_HEADER_PHY_INDEX identifies the Ethernet PHY the message relates to. As there are numerous commands that are related to PHY configuration, and because there may be more than one PHY on the link, the PHY index can be passed in the request for the commands that needs it. It is, however, not mandatory, and if it is not passed for commands that target a PHY, the net_device.phydev pointer is used.

Bit sets¶

For short bitmaps of (reasonably) fixed length, standard NLA_BITFIELD32 type is used. For arbitrary length bitmaps, ethtool netlink uses a nested attribute with contents of one of two forms: compact (two binary bitmaps representing bit values and mask of affected bits) and bit-by-bit (list of bits identified by either index or name).

Verbose (bit-by-bit) bitsets allow sending symbolic names for bits together with their values which saves a round trip (when the bitset is passed in a request) or at least a second request (when the bitset is in a reply). This is useful for one shot applications like traditional ethtool command. On the other hand, long running applications like ethtool monitor (displaying notifications) or network management daemons may prefer fetching the names only once and using compact form to save message size. Notifications from ethtool netlink interface always use compact form for bitsets.

A bitset can represent either a value/mask pair (ETHTOOL_A_BITSET_NOMASK not set) or a single bitmap (ETHTOOL_A_BITSET_NOMASK set). In requests modifying a bitmap, the former changes the bit set in mask to values set in value and preserves the rest; the latter sets the bits set in the bitmap and clears the rest.

Compact form: nested (bitset) attribute contents:

ETHTOOL_A_BITSET_NOMASK

flag

no mask, only a list

ETHTOOL_A_BITSET_SIZE

u32

number of significant bits

ETHTOOL_A_BITSET_VALUE

binary

bitmap of bit values

ETHTOOL_A_BITSET_MASK

binary

bitmap of valid bits

Value and mask must have length at least ETHTOOL_A_BITSET_SIZE bits rounded up to a multiple of 32 bits. They consist of 32-bit words in host byte order, words ordered from least significant to most significant (i.e. the same way as bitmaps are passed with ioctl interface).

For compact form, ETHTOOL_A_BITSET_SIZE and ETHTOOL_A_BITSET_VALUE are mandatory. ETHTOOL_A_BITSET_MASK attribute is mandatory if ETHTOOL_A_BITSET_NOMASK is not set (bitset represents a value/mask pair); if ETHTOOL_A_BITSET_NOMASK is not set, ETHTOOL_A_BITSET_MASK is not allowed (bitset represents a single bitmap.

Kernel bit set length may differ from userspace length if older application is used on newer kernel or vice versa. If userspace bitmap is longer, an error is issued only if the request actually tries to set values of some bits not recognized by kernel.

Bit-by-bit form: nested (bitset) attribute contents:

ETHTOOL_A_BITSET_NOMASK

flag

no mask, only a list

ETHTOOL_A_BITSET_SIZE

u32

number of significant bits

ETHTOOL_A_BITSET_BITS

nested

array of bits

ETHTOOL_A_BITSET_BITS_BIT+

nested

one bit

ETHTOOL_A_BITSET_BIT_INDEX

u32

bit index (0 for LSB)

ETHTOOL_A_BITSET_BIT_NAME

string

bit name

ETHTOOL_A_BITSET_BIT_VALUE

flag

present if bit is set

Bit size is optional for bit-by-bit form. ETHTOOL_A_BITSET_BITS nest can only contain ETHTOOL_A_BITSET_BITS_BIT attributes but there can be an arbitrary number of them. A bit may be identified by its index or by its name. When used in requests, listed bits are set to 0 or 1 according to ETHTOOL_A_BITSET_BIT_VALUE, the rest is preserved. A request fails if index exceeds kernel bit length or if name is not recognized.

When ETHTOOL_A_BITSET_NOMASK flag is present, bitset is interpreted as a simple bitmap. ETHTOOL_A_BITSET_BIT_VALUE attributes are not used in such case. Such bitset represents a bitmap with listed bits set and the rest zero.

In requests, application can use either form. Form used by kernel in reply is determined by ETHTOOL_FLAG_COMPACT_BITSETS flag in flags field of request header. Semantics of value and mask depends on the attribute.

List of message types¶

All constants identifying message types use ETHTOOL_CMD_ prefix and suffix according to message purpose:

_GET

userspace request to retrieve data

_SET

userspace request to set data

_ACT

userspace request to perform an action

_GET_REPLY

kernel reply to a GET request

_SET_REPLY

kernel reply to a SET request

_ACT_REPLY

kernel reply to an ACT request

_NTF

kernel notification

Userspace to kernel:

ETHTOOL_MSG_STRSET_GET

get string set

ETHTOOL_MSG_LINKINFO_GET

get link settings

ETHTOOL_MSG_LINKINFO_SET

set link settings

ETHTOOL_MSG_LINKMODES_GET

get link modes info

ETHTOOL_MSG_LINKMODES_SET

set link modes info

ETHTOOL_MSG_LINKSTATE_GET

get link state

ETHTOOL_MSG_DEBUG_GET

get debugging settings

ETHTOOL_MSG_DEBUG_SET

set debugging settings

ETHTOOL_MSG_WOL_GET

get wake-on-lan settings

ETHTOOL_MSG_WOL_SET

set wake-on-lan settings

ETHTOOL_MSG_FEATURES_GET

get device features

ETHTOOL_MSG_FEATURES_SET

set device features

ETHTOOL_MSG_PRIVFLAGS_GET

get private flags

ETHTOOL_MSG_PRIVFLAGS_SET

set private flags

ETHTOOL_MSG_RINGS_GET

get ring sizes

ETHTOOL_MSG_RINGS_SET

set ring sizes

ETHTOOL_MSG_CHANNELS_GET

get channel counts

ETHTOOL_MSG_CHANNELS_SET

set channel counts

ETHTOOL_MSG_COALESCE_GET

get coalescing parameters

ETHTOOL_MSG_COALESCE_SET

set coalescing parameters

ETHTOOL_MSG_PAUSE_GET

get pause parameters

ETHTOOL_MSG_PAUSE_SET

set pause parameters

ETHTOOL_MSG_EEE_GET

get EEE settings

ETHTOOL_MSG_EEE_SET

set EEE settings

ETHTOOL_MSG_TSINFO_GET

get timestamping info

ETHTOOL_MSG_CABLE_TEST_ACT

action start cable test

ETHTOOL_MSG_CABLE_TEST_TDR_ACT

action start raw TDR cable test

ETHTOOL_MSG_TUNNEL_INFO_GET

get tunnel offload info

ETHTOOL_MSG_FEC_GET

get FEC settings

ETHTOOL_MSG_FEC_SET

set FEC settings

ETHTOOL_MSG_MODULE_EEPROM_GET

read SFP module EEPROM

ETHTOOL_MSG_STATS_GET

get standard statistics

ETHTOOL_MSG_PHC_VCLOCKS_GET

get PHC virtual clocks info

ETHTOOL_MSG_MODULE_SET

set transceiver module parameters

ETHTOOL_MSG_MODULE_GET

get transceiver module parameters

ETHTOOL_MSG_PSE_SET

set PSE parameters

ETHTOOL_MSG_PSE_GET

get PSE parameters

ETHTOOL_MSG_RSS_GET

get RSS settings

ETHTOOL_MSG_PLCA_GET_CFG

get PLCA RS parameters

ETHTOOL_MSG_PLCA_SET_CFG

set PLCA RS parameters

ETHTOOL_MSG_PLCA_GET_STATUS

get PLCA RS status

ETHTOOL_MSG_MM_GET

get MAC merge layer state

ETHTOOL_MSG_MM_SET

set MAC merge layer parameters

ETHTOOL_MSG_MODULE_FW_FLASH_ACT

flash transceiver module firmware

Kernel to userspace:

ETHTOOL_MSG_STRSET_GET_REPLY

string set contents

ETHTOOL_MSG_LINKINFO_GET_REPLY

link settings

ETHTOOL_MSG_LINKINFO_NTF

link settings notification

ETHTOOL_MSG_LINKMODES_GET_REPLY

link modes info

ETHTOOL_MSG_LINKMODES_NTF

link modes notification

ETHTOOL_MSG_LINKSTATE_GET_REPLY

link state info

ETHTOOL_MSG_DEBUG_GET_REPLY

debugging settings

ETHTOOL_MSG_DEBUG_NTF

debugging settings notification

ETHTOOL_MSG_WOL_GET_REPLY

wake-on-lan settings

ETHTOOL_MSG_WOL_NTF

wake-on-lan settings notification

ETHTOOL_MSG_FEATURES_GET_REPLY

device features

ETHTOOL_MSG_FEATURES_SET_REPLY

optional reply to FEATURES_SET

ETHTOOL_MSG_FEATURES_NTF

netdev features notification

ETHTOOL_MSG_PRIVFLAGS_GET_REPLY

private flags

ETHTOOL_MSG_PRIVFLAGS_NTF

private flags

ETHTOOL_MSG_RINGS_GET_REPLY

ring sizes

ETHTOOL_MSG_RINGS_NTF

ring sizes

ETHTOOL_MSG_CHANNELS_GET_REPLY

channel counts

ETHTOOL_MSG_CHANNELS_NTF

channel counts

ETHTOOL_MSG_COALESCE_GET_REPLY

coalescing parameters

ETHTOOL_MSG_COALESCE_NTF

coalescing parameters

ETHTOOL_MSG_PAUSE_GET_REPLY

pause parameters

ETHTOOL_MSG_PAUSE_NTF

pause parameters

ETHTOOL_MSG_EEE_GET_REPLY

EEE settings

ETHTOOL_MSG_EEE_NTF

EEE settings

ETHTOOL_MSG_TSINFO_GET_REPLY

timestamping info

ETHTOOL_MSG_CABLE_TEST_NTF

Cable test results

ETHTOOL_MSG_CABLE_TEST_TDR_NTF

Cable test TDR results

ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY

tunnel offload info

ETHTOOL_MSG_FEC_GET_REPLY

FEC settings

ETHTOOL_MSG_FEC_NTF

FEC settings

ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY

read SFP module EEPROM

ETHTOOL_MSG_STATS_GET_REPLY

standard statistics

ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY

PHC virtual clocks info

ETHTOOL_MSG_MODULE_GET_REPLY

transceiver module parameters

ETHTOOL_MSG_PSE_GET_REPLY

PSE parameters

ETHTOOL_MSG_RSS_GET_REPLY

RSS settings

ETHTOOL_MSG_PLCA_GET_CFG_REPLY

PLCA RS parameters

ETHTOOL_MSG_PLCA_GET_STATUS_REPLY

PLCA RS status

ETHTOOL_MSG_PLCA_NTF

PLCA RS parameters

ETHTOOL_MSG_MM_GET_REPLY

MAC merge layer status

ETHTOOL_MSG_MODULE_FW_FLASH_NTF

transceiver module flash updates

GET requests are sent by userspace applications to retrieve device information. They usually do not contain any message specific attributes. Kernel replies with corresponding “GET_REPLY” message. For most types, GET request with NLM_F_DUMP and no device identification can be used to query the information for all devices supporting the request.

If the data can be also modified, corresponding SET message with the same layout as corresponding GET_REPLY is used to request changes. Only attributes where a change is requested are included in such request (also, not all attributes may be changed). Replies to most SET request consist only of error code and extack; if kernel provides additional data, it is sent in the form of corresponding SET_REPLY message which can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header.

Data modification also triggers sending a NTF message with a notification. These usually bear only a subset of attributes which was affected by the change. The same notification is issued if the data is modified using other means (mostly ioctl ethtool interface). Unlike notifications from ethtool netlink code which are only sent if something actually changed, notifications triggered by ioctl interface may be sent even if the request did not actually change any data.

ACT messages request kernel (driver) to perform a specific action. If some information is reported by kernel (which can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY flag in request header), the reply takes form of an ACT_REPLY message. Performing an action also triggers a notification (NTF message).

Later sections describe the format and semantics of these messages.

STRSET_GET¶

Requests contents of a string set as provided by ioctl commands ETHTOOL_GSSET_INFO and ETHTOOL_GSTRINGS. String sets are not user writeable so that the corresponding STRSET_SET message is only used in kernel replies. There are two types of string sets: global (independent of a device, e.g. device feature names) and device specific (e.g. device private flags).

Request contents:

ETHTOOL_A_STRSET_HEADER

nested

request header

ETHTOOL_A_STRSET_STRINGSETS

nested

string set to request

ETHTOOL_A_STRINGSETS_STRINGSET+

nested

one string set

ETHTOOL_A_STRINGSET_ID

u32

set id

Kernel response contents:

ETHTOOL_A_STRSET_HEADER

nested

reply header

ETHTOOL_A_STRSET_STRINGSETS

nested

array of string sets

ETHTOOL_A_STRINGSETS_STRINGSET+

nested

one string set

ETHTOOL_A_STRINGSET_ID

u32

set id

ETHTOOL_A_STRINGSET_COUNT

u32

number of strings

ETHTOOL_A_STRINGSET_STRINGS

nested

array of strings

ETHTOOL_A_STRINGS_STRING+

nested

one string

ETHTOOL_A_STRING_INDEX

u32

string index

ETHTOOL_A_STRING_VALUE

string

string value

ETHTOOL_A_STRSET_COUNTS_ONLY

flag

return only counts

Device identification in request header is optional. Depending on its presence a and NLM_F_DUMP flag, there are three type of STRSET_GET requests:

no NLM_F_DUMP, no device: get “global” stringsets

no NLM_F_DUMP, with device: get string sets related to the device

NLM_F_DUMP, no device: get device related string sets for all devices

If there is no ETHTOOL_A_STRSET_STRINGSETS array, all string sets of requested type are returned, otherwise only those specified in the request. Flag ETHTOOL_A_STRSET_COUNTS_ONLY tells kernel to only return string counts of the sets, not the actual strings.

LINKINFO_GET¶

Requests link settings as provided by ETHTOOL_GLINKSETTINGS except for link modes and autonegotiation related information. The request does not use any attributes.

Request contents:

ETHTOOL_A_LINKINFO_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_LINKINFO_HEADER

nested

reply header

ETHTOOL_A_LINKINFO_PORT

u8

physical port

ETHTOOL_A_LINKINFO_PHYADDR

u8

phy MDIO address

ETHTOOL_A_LINKINFO_TP_MDIX

u8

MDI(-X) status

ETHTOOL_A_LINKINFO_TP_MDIX_CTRL

u8

MDI(-X) control

ETHTOOL_A_LINKINFO_TRANSCEIVER

u8

transceiver

Attributes and their values have the same meaning as matching members of the corresponding ioctl structures.

LINKINFO_GET allows dump requests (kernel returns reply message for all devices supporting the request).

LINKINFO_SET¶

LINKINFO_SET request allows setting some of the attributes reported by LINKINFO_GET.

Request contents:

ETHTOOL_A_LINKINFO_HEADER

nested

request header

ETHTOOL_A_LINKINFO_PORT

u8

physical port

ETHTOOL_A_LINKINFO_PHYADDR

u8

phy MDIO address

ETHTOOL_A_LINKINFO_TP_MDIX_CTRL

u8

MDI(-X) control

MDI(-X) status and transceiver cannot be set, request with the corresponding attributes is rejected.

LINKMODES_GET¶

Requests link modes (supported, advertised and peer advertised) and related information (autonegotiation status, link speed and duplex) as provided by ETHTOOL_GLINKSETTINGS. The request does not use any attributes.

Request contents:

ETHTOOL_A_LINKMODES_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_LINKMODES_HEADER

nested

reply header

ETHTOOL_A_LINKMODES_AUTONEG

u8

autonegotiation status

ETHTOOL_A_LINKMODES_OURS

bitset

advertised link modes

ETHTOOL_A_LINKMODES_PEER

bitset

partner link modes

ETHTOOL_A_LINKMODES_SPEED

u32

link speed (Mb/s)

ETHTOOL_A_LINKMODES_DUPLEX

u8

duplex mode

ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG

u8

Master/slave port mode

ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE

u8

Master/slave port state

ETHTOOL_A_LINKMODES_RATE_MATCHING

u8

PHY rate matching

For ETHTOOL_A_LINKMODES_OURS, value represents advertised modes and mask represents supported modes. ETHTOOL_A_LINKMODES_PEER in the reply is a bit list.

LINKMODES_GET allows dump requests (kernel returns reply messages for all devices supporting the request).

LINKMODES_SET¶

Request contents:

ETHTOOL_A_LINKMODES_HEADER

nested

request header

ETHTOOL_A_LINKMODES_AUTONEG

u8

autonegotiation status

ETHTOOL_A_LINKMODES_OURS

bitset

advertised link modes

ETHTOOL_A_LINKMODES_PEER

bitset

partner link modes

ETHTOOL_A_LINKMODES_SPEED

u32

link speed (Mb/s)

ETHTOOL_A_LINKMODES_DUPLEX

u8

duplex mode

ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG

u8

Master/slave port mode

ETHTOOL_A_LINKMODES_RATE_MATCHING

u8

PHY rate matching

ETHTOOL_A_LINKMODES_LANES

u32

lanes

ETHTOOL_A_LINKMODES_OURS bit set allows setting advertised link modes. If autonegotiation is on (either set now or kept from before), advertised modes are not changed (no ETHTOOL_A_LINKMODES_OURS attribute) and at least one of speed, duplex and lanes is specified, kernel adjusts advertised modes to all supported modes matching speed, duplex, lanes or all (whatever is specified). This autoselection is done on ethtool side with ioctl interface, netlink interface is supposed to allow requesting changes without knowing what exactly kernel supports.

LINKSTATE_GET¶

Requests link state information. Link up/down flag (as provided by ETHTOOL_GLINK ioctl command) is provided. Optionally, extended state might be provided as well. In general, extended state describes reasons for why a port is down, or why it operates in some non-obvious mode. This request does not have any attributes.

Request contents:

ETHTOOL_A_LINKSTATE_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_LINKSTATE_HEADER

nested

reply header

ETHTOOL_A_LINKSTATE_LINK

bool

link state (up/down)

ETHTOOL_A_LINKSTATE_SQI

u32

Current Signal Quality Index

ETHTOOL_A_LINKSTATE_SQI_MAX

u32

Max support SQI value

ETHTOOL_A_LINKSTATE_EXT_STATE

u8

link extended state

ETHTOOL_A_LINKSTATE_EXT_SUBSTATE

u8

link extended substate

ETHTOOL_A_LINKSTATE_EXT_DOWN_CNT

u32

count of link down events

For most NIC drivers, the value of ETHTOOL_A_LINKSTATE_LINK returns carrier flag provided by netif_carrier_ok() but there are drivers which define their own handler.

ETHTOOL_A_LINKSTATE_EXT_STATE and ETHTOOL_A_LINKSTATE_EXT_SUBSTATE are optional values. ethtool core can provide either both ETHTOOL_A_LINKSTATE_EXT_STATE and ETHTOOL_A_LINKSTATE_EXT_SUBSTATE, or only ETHTOOL_A_LINKSTATE_EXT_STATE, or none of them.

LINKSTATE_GET allows dump requests (kernel returns reply messages for all devices supporting the request).

Link extended states:

ETHTOOL_LINK_EXT_STATE_AUTONEG

States relating to the autonegotiation or issues therein

ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE

Failure during link training

ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH

Logical mismatch in physical coding sublayer or forward error correction sublayer

ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY

Signal integrity issues

ETHTOOL_LINK_EXT_STATE_NO_CABLE

No cable connected

ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE

Failure is related to cable, e.g., unsupported cable

ETHTOOL_LINK_EXT_STATE_EEPROM_ISSUE

Failure is related to EEPROM, e.g., failure during reading or parsing the data

ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE

Failure during calibration algorithm

ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED

The hardware is not able to provide the power required from cable or module

ETHTOOL_LINK_EXT_STATE_OVERHEAT

The module is overheated

ETHTOOL_LINK_EXT_STATE_MODULE

Transceiver module issue

Link extended substates:

Autoneg substates:

ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED

Peer side is down

ETHTOOL_LINK_EXT_SUBSTATE_AN_ACK_NOT_RECEIVED

Ack not received from peer side

ETHTOOL_LINK_EXT_SUBSTATE_AN_NEXT_PAGE_EXCHANGE_FAILED

Next page exchange failed

ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED_FORCE_MODE

Peer side is down during force mode or there is no agreement of speed

ETHTOOL_LINK_EXT_SUBSTATE_AN_FEC_MISMATCH_DURING_OVERRIDE

Forward error correction modes in both sides are mismatched

ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_HCD

No Highest Common Denominator

Link training substates:

ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_FRAME_LOCK_NOT_ACQUIRED

Frames were not recognized, the lock failed

ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_INHIBIT_TIMEOUT

The lock did not occur before timeout

ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_PARTNER_DID_NOT_SET_RECEIVER_READY

Peer side did not send ready signal after training process

ETHTOOL_LINK_EXT_SUBSTATE_LT_REMOTE_FAULT

Remote side is not ready yet

Link logical mismatch substates:

ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_BLOCK_LOCK

Physical coding sublayer was not locked in first phase - block lock

ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_AM_LOCK

Physical coding sublayer was not locked in second phase - alignment markers lock

ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_GET_ALIGN_STATUS

Physical coding sublayer did not get align status

ETHTOOL_LINK_EXT_SUBSTATE_LLM_FC_FEC_IS_NOT_LOCKED

FC forward error correction is not locked

ETHTOOL_LINK_EXT_SUBSTATE_LLM_RS_FEC_IS_NOT_LOCKED

RS forward error correction is not locked

Bad signal integrity substates:

ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS

Large number of physical errors

ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE

The system attempted to operate the cable at a rate that is not formally supported, which led to signal integrity issues

ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST

The external clock signal for SerDes is too weak or unavailable.

ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS

The received signal for SerDes is too weak because analog loss of signal.

Cable issue substates:

ETHTOOL_LINK_EXT_SUBSTATE_CI_UNSUPPORTED_CABLE

Unsupported cable

ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE

Cable test failure

Transceiver module issue substates:

ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY

The CMIS Module State Machine did not reach the ModuleReady state. For example, if the module is stuck at ModuleFault state

DEBUG_GET¶

Requests debugging settings of a device. At the moment, only message mask is provided.

Request contents:

ETHTOOL_A_DEBUG_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_DEBUG_HEADER

nested

reply header

ETHTOOL_A_DEBUG_MSGMASK

bitset

message mask

The message mask (ETHTOOL_A_DEBUG_MSGMASK) is equal to message level as provided by ETHTOOL_GMSGLVL and set by ETHTOOL_SMSGLVL in ioctl interface. While it is called message level there for historical reasons, most drivers and almost all newer drivers use it as a mask of enabled message classes (represented by NETIF_MSG_* constants); therefore netlink interface follows its actual use in practice.

DEBUG_GET allows dump requests (kernel returns reply messages for all devices supporting the request).

DEBUG_SET¶

Set or update debugging settings of a device. At the moment, only message mask is supported.

Request contents:

ETHTOOL_A_DEBUG_HEADER

nested

request header

ETHTOOL_A_DEBUG_MSGMASK

bitset

message mask

ETHTOOL_A_DEBUG_MSGMASK bit set allows setting or modifying mask of enabled debugging message types for the device.

WOL_GET¶

Query device wake-on-lan settings. Unlike most “GET” type requests, ETHTOOL_MSG_WOL_GET requires (netns) CAP_NET_ADMIN privileges as it (potentially) provides SecureOn(tm) password which is confidential.

Request contents:

ETHTOOL_A_WOL_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_WOL_HEADER

nested

reply header

ETHTOOL_A_WOL_MODES

bitset

mask of enabled WoL modes

ETHTOOL_A_WOL_SOPASS

binary

SecureOn(tm) password

In reply, ETHTOOL_A_WOL_MODES mask consists of modes supported by the device, value of modes which are enabled. ETHTOOL_A_WOL_SOPASS is only included in reply if WAKE_MAGICSECURE mode is supported.

WOL_SET¶

Set or update wake-on-lan settings.

Request contents:

ETHTOOL_A_WOL_HEADER

nested

request header

ETHTOOL_A_WOL_MODES

bitset

enabled WoL modes

ETHTOOL_A_WOL_SOPASS

binary

SecureOn(tm) password

ETHTOOL_A_WOL_SOPASS is only allowed for devices supporting WAKE_MAGICSECURE mode.

FEATURES_GET¶

Gets netdev features like ETHTOOL_GFEATURES ioctl request.

Request contents:

ETHTOOL_A_FEATURES_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_FEATURES_HEADER

nested

reply header

ETHTOOL_A_FEATURES_HW

bitset

dev->hw_features

ETHTOOL_A_FEATURES_WANTED

bitset

dev->wanted_features

ETHTOOL_A_FEATURES_ACTIVE

bitset

dev->features

ETHTOOL_A_FEATURES_NOCHANGE

bitset

NETIF_F_NEVER_CHANGE

Bitmaps in kernel response have the same meaning as bitmaps used in ioctl interference but attribute names are different (they are based on corresponding members of struct net_device). Legacy “flags” are not provided, if userspace needs them (most likely only ethtool for backward compatibility), it can calculate their values from related feature bits itself. ETHA_FEATURES_HW uses mask consisting of all features recognized by kernel (to provide all names when using verbose bitmap format), the other three use no mask (simple bit lists).

FEATURES_SET¶

Request to set netdev features like ETHTOOL_SFEATURES ioctl request.

Request contents:

ETHTOOL_A_FEATURES_HEADER

nested

request header

ETHTOOL_A_FEATURES_WANTED

bitset

requested features

Kernel response contents:

ETHTOOL_A_FEATURES_HEADER

nested

reply header

ETHTOOL_A_FEATURES_WANTED

bitset

diff wanted vs. result

ETHTOOL_A_FEATURES_ACTIVE

bitset

diff old vs. new active

Request contains only one bitset which can be either value/mask pair (request to change specific feature bits and leave the rest) or only a value (request to set all features to specified set).

As request is subject to netdev_change_features() sanity checks, optional kernel reply (can be suppressed by ETHTOOL_FLAG_OMIT_REPLY flag in request header) informs client about the actual result. ETHTOOL_A_FEATURES_WANTED reports the difference between client request and actual result: mask consists of bits which differ between requested features and result (dev->features after the operation), value consists of values of these bits in the request (i.e. negated values from resulting features). ETHTOOL_A_FEATURES_ACTIVE reports the difference between old and new dev->features: mask consists of bits which have changed, values are their values in new dev->features (after the operation).

ETHTOOL_MSG_FEATURES_NTF notification is sent not only if device features are modified using ETHTOOL_MSG_FEATURES_SET request or on of ethtool ioctl request but also each time features are modified with netdev_update_features() or netdev_change_features().

PRIVFLAGS_GET¶

Gets private flags like ETHTOOL_GPFLAGS ioctl request.

Request contents:

ETHTOOL_A_PRIVFLAGS_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_PRIVFLAGS_HEADER

nested

reply header

ETHTOOL_A_PRIVFLAGS_FLAGS

bitset

private flags

ETHTOOL_A_PRIVFLAGS_FLAGS is a bitset with values of device private flags. These flags are defined by driver, their number and names (and also meaning) are device dependent. For compact bitset format, names can be retrieved as ETH_SS_PRIV_FLAGS string set. If verbose bitset format is requested, response uses all private flags supported by the device as mask so that client gets the full information without having to fetch the string set with names.

PRIVFLAGS_SET¶

Sets or modifies values of device private flags like ETHTOOL_SPFLAGS ioctl request.

Request contents:

ETHTOOL_A_PRIVFLAGS_HEADER

nested

request header

ETHTOOL_A_PRIVFLAGS_FLAGS

bitset

private flags

ETHTOOL_A_PRIVFLAGS_FLAGS can either set the whole set of private flags or modify only values of some of them.

RINGS_GET¶

Gets ring sizes like ETHTOOL_GRINGPARAM ioctl request.

Request contents:

ETHTOOL_A_RINGS_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_RINGS_HEADER

nested

reply header

ETHTOOL_A_RINGS_RX_MAX

u32

max size of RX ring

ETHTOOL_A_RINGS_RX_MINI_MAX

u32

max size of RX mini ring

ETHTOOL_A_RINGS_RX_JUMBO_MAX

u32

max size of RX jumbo ring

ETHTOOL_A_RINGS_TX_MAX

u32

max size of TX ring

ETHTOOL_A_RINGS_RX

u32

size of RX ring

ETHTOOL_A_RINGS_RX_MINI

u32

size of RX mini ring

ETHTOOL_A_RINGS_RX_JUMBO

u32

size of RX jumbo ring

ETHTOOL_A_RINGS_TX

u32

size of TX ring

ETHTOOL_A_RINGS_RX_BUF_LEN

u32

size of buffers on the ring

ETHTOOL_A_RINGS_TCP_DATA_SPLIT

u8

TCP header / data split

ETHTOOL_A_RINGS_CQE_SIZE

u32

Size of TX/RX CQE

ETHTOOL_A_RINGS_TX_PUSH

u8

flag of TX Push mode

ETHTOOL_A_RINGS_RX_PUSH

u8

flag of RX Push mode

ETHTOOL_A_RINGS_TX_PUSH_BUF_LEN

u32

size of TX push buffer

ETHTOOL_A_RINGS_TX_PUSH_BUF_LEN_MAX

u32

max size of TX push buffer

ETHTOOL_A_RINGS_TCP_DATA_SPLIT indicates whether the device is usable with page-flipping TCP zero-copy receive (getsockopt(TCP_ZEROCOPY_RECEIVE)). If enabled the device is configured to place frame headers and data into separate buffers. The device configuration must make it possible to receive full memory pages of data, for example because MTU is high enough or through HW-GRO.

ETHTOOL_A_RINGS_[RX|TX]_PUSH flag is used to enable descriptor fast path to send or receive packets. In ordinary path, driver fills descriptors in DRAM and notifies NIC hardware. In fast path, driver pushes descriptors to the device through MMIO writes, thus reducing the latency. However, enabling this feature may increase the CPU cost. Drivers may enforce additional per-packet eligibility checks (e.g. on packet size).

ETHTOOL_A_RINGS_TX_PUSH_BUF_LEN specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device (‘push’ mode). Pushing some of the payload bytes to the device has the advantages of reducing latency for small packets by avoiding DMA mapping (same as ETHTOOL_A_RINGS_TX_PUSH parameter) as well as allowing the underlying device to process packet headers ahead of fetching its payload. This can help the device to make fast actions based on the packet’s headers. This is similar to the “tx-copybreak” parameter, which copies the packet to a preallocated DMA memory area instead of mapping new memory. However, tx-push-buff parameter copies the packet directly to the device to allow the device to take faster actions on the packet.

RINGS_SET¶

Sets ring sizes like ETHTOOL_SRINGPARAM ioctl request.

Request contents:

ETHTOOL_A_RINGS_HEADER

nested

reply header

ETHTOOL_A_RINGS_RX

u32

size of RX ring

ETHTOOL_A_RINGS_RX_MINI

u32

size of RX mini ring

ETHTOOL_A_RINGS_RX_JUMBO

u32

size of RX jumbo ring

ETHTOOL_A_RINGS_TX

u32

size of TX ring

ETHTOOL_A_RINGS_RX_BUF_LEN

u32

size of buffers on the ring

ETHTOOL_A_RINGS_CQE_SIZE

u32

Size of TX/RX CQE

ETHTOOL_A_RINGS_TX_PUSH

u8

flag of TX Push mode

ETHTOOL_A_RINGS_RX_PUSH

u8

flag of RX Push mode

ETHTOOL_A_RINGS_TX_PUSH_BUF_LEN

u32

size of TX push buffer

Kernel checks that requested ring sizes do not exceed limits reported by driver. Driver may impose additional constraints and may not support all attributes.

ETHTOOL_A_RINGS_CQE_SIZE specifies the completion queue event size. Completion queue events (CQE) are the events posted by NIC to indicate the completion status of a packet when the packet is sent (like send success or error) or received (like pointers to packet fragments). The CQE size parameter enables to modify the CQE size other than default size if NIC supports it. A bigger CQE can have more receive buffer pointers, and in turn the NIC can transfer a bigger frame from wire. Based on the NIC hardware, the overall completion queue size can be adjusted in the driver if CQE size is modified.

CHANNELS_GET¶

Gets channel counts like ETHTOOL_GCHANNELS ioctl request.

Request contents:

ETHTOOL_A_CHANNELS_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_CHANNELS_HEADER

nested

reply header

ETHTOOL_A_CHANNELS_RX_MAX

u32

max receive channels

ETHTOOL_A_CHANNELS_TX_MAX

u32

max transmit channels

ETHTOOL_A_CHANNELS_OTHER_MAX

u32

max other channels

ETHTOOL_A_CHANNELS_COMBINED_MAX

u32

max combined channels

ETHTOOL_A_CHANNELS_RX_COUNT

u32

receive channel count

ETHTOOL_A_CHANNELS_TX_COUNT

u32

transmit channel count

ETHTOOL_A_CHANNELS_OTHER_COUNT

u32

other channel count

ETHTOOL_A_CHANNELS_COMBINED_COUNT

u32

combined channel count

CHANNELS_SET¶

Sets channel counts like ETHTOOL_SCHANNELS ioctl request.

Request contents:

ETHTOOL_A_CHANNELS_HEADER

nested

request header

ETHTOOL_A_CHANNELS_RX_COUNT

u32

receive channel count

ETHTOOL_A_CHANNELS_TX_COUNT

u32

transmit channel count

ETHTOOL_A_CHANNELS_OTHER_COUNT

u32

other channel count

ETHTOOL_A_CHANNELS_COMBINED_COUNT

u32

combined channel count

Kernel checks that requested channel counts do not exceed limits reported by driver. Driver may impose additional constraints and may not support all attributes.

COALESCE_GET¶

Gets coalescing parameters like ETHTOOL_GCOALESCE ioctl request.

Request contents:

ETHTOOL_A_COALESCE_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_COALESCE_HEADER

nested

reply header

ETHTOOL_A_COALESCE_RX_USECS

u32

delay (us), normal Rx

ETHTOOL_A_COALESCE_RX_MAX_FRAMES

u32

max packets, normal Rx

ETHTOOL_A_COALESCE_RX_USECS_IRQ

u32

delay (us), Rx in IRQ

ETHTOOL_A_COALESCE_RX_MAX_FRAMES_IRQ

u32

max packets, Rx in IRQ

ETHTOOL_A_COALESCE_TX_USECS

u32

delay (us), normal Tx

ETHTOOL_A_COALESCE_TX_MAX_FRAMES

u32

max packets, normal Tx

ETHTOOL_A_COALESCE_TX_USECS_IRQ

u32

delay (us), Tx in IRQ

ETHTOOL_A_COALESCE_TX_MAX_FRAMES_IRQ

u32

IRQ packets, Tx in IRQ

ETHTOOL_A_COALESCE_STATS_BLOCK_USECS

u32

delay of stats update

ETHTOOL_A_COALESCE_USE_ADAPTIVE_RX

bool

adaptive Rx coalesce

ETHTOOL_A_COALESCE_USE_ADAPTIVE_TX

bool

adaptive Tx coalesce

ETHTOOL_A_COALESCE_PKT_RATE_LOW

u32

threshold for low rate

ETHTOOL_A_COALESCE_RX_USECS_LOW

u32

delay (us), low Rx

ETHTOOL_A_COALESCE_RX_MAX_FRAMES_LOW

u32

max packets, low Rx

ETHTOOL_A_COALESCE_TX_USECS_LOW

u32

delay (us), low Tx

ETHTOOL_A_COALESCE_TX_MAX_FRAMES_LOW

u32

max packets, low Tx

ETHTOOL_A_COALESCE_PKT_RATE_HIGH

u32

threshold for high rate

ETHTOOL_A_COALESCE_RX_USECS_HIGH

u32

delay (us), high Rx

ETHTOOL_A_COALESCE_RX_MAX_FRAMES_HIGH

u32

max packets, high Rx

ETHTOOL_A_COALESCE_TX_USECS_HIGH

u32

delay (us), high Tx

ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH

u32

max packets, high Tx

ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL

u32

rate sampling interval

ETHTOOL_A_COALESCE_USE_CQE_TX

bool

timer reset mode, Tx

ETHTOOL_A_COALESCE_USE_CQE_RX

bool

timer reset mode, Rx

ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES

u32

max aggr size, Tx

ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES

u32

max aggr packets, Tx

ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS

u32

time (us), aggr, Tx

ETHTOOL_A_COALESCE_RX_PROFILE

nested

profile of DIM, Rx

ETHTOOL_A_COALESCE_TX_PROFILE

nested

profile of DIM, Tx

Attributes are only included in reply if their value is not zero or the corresponding bit in ethtool_ops::supported_coalesce_params is set (i.e. they are declared as supported by driver).

Timer reset mode (ETHTOOL_A_COALESCE_USE_CQE_TX and ETHTOOL_A_COALESCE_USE_CQE_RX) controls the interaction between packet arrival and the various time based delay parameters. By default timers are expected to limit the max delay between any packet arrival/departure and a corresponding interrupt. In this mode timer should be started by packet arrival (sometimes delivery of previous interrupt) and reset when interrupt is delivered. Setting the appropriate attribute to 1 will enable CQE mode, where each packet event resets the timer. In this mode timer is used to force the interrupt if queue goes idle, while busy queues depend on the packet limit to trigger interrupts.

Tx aggregation consists of copying frames into a contiguous buffer so that they can be submitted as a single IO operation. ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES describes the maximum size in bytes for the submitted buffer. ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES describes the maximum number of frames that can be aggregated into a single buffer. ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS describes the amount of time in usecs, counted since the first packet arrival in an aggregated block, after which the block should be sent. This feature is mainly of interest for specific USB devices which does not cope well with frequent small-sized URBs transmissions.

ETHTOOL_A_COALESCE_RX_PROFILE and ETHTOOL_A_COALESCE_TX_PROFILE refer to DIM parameters, see Generic Network Dynamic Interrupt Moderation (Net DIM).

COALESCE_SET¶

Sets coalescing parameters like ETHTOOL_SCOALESCE ioctl request.

Request contents:

ETHTOOL_A_COALESCE_HEADER

nested

request header

ETHTOOL_A_COALESCE_RX_USECS

u32

delay (us), normal Rx

ETHTOOL_A_COALESCE_RX_MAX_FRAMES

u32

max packets, normal Rx

ETHTOOL_A_COALESCE_RX_USECS_IRQ

u32

delay (us), Rx in IRQ

ETHTOOL_A_COALESCE_RX_MAX_FRAMES_IRQ

u32

max packets, Rx in IRQ

ETHTOOL_A_COALESCE_TX_USECS

u32

delay (us), normal Tx

ETHTOOL_A_COALESCE_TX_MAX_FRAMES

u32

max packets, normal Tx

ETHTOOL_A_COALESCE_TX_USECS_IRQ

u32

delay (us), Tx in IRQ

ETHTOOL_A_COALESCE_TX_MAX_FRAMES_IRQ

u32

IRQ packets, Tx in IRQ

ETHTOOL_A_COALESCE_STATS_BLOCK_USECS

u32

delay of stats update

ETHTOOL_A_COALESCE_USE_ADAPTIVE_RX

bool

adaptive Rx coalesce

ETHTOOL_A_COALESCE_USE_ADAPTIVE_TX

bool

adaptive Tx coalesce

ETHTOOL_A_COALESCE_PKT_RATE_LOW

u32

threshold for low rate

ETHTOOL_A_COALESCE_RX_USECS_LOW

u32

delay (us), low Rx

ETHTOOL_A_COALESCE_RX_MAX_FRAMES_LOW

u32

max packets, low Rx

ETHTOOL_A_COALESCE_TX_USECS_LOW

u32

delay (us), low Tx

ETHTOOL_A_COALESCE_TX_MAX_FRAMES_LOW

u32

max packets, low Tx

ETHTOOL_A_COALESCE_PKT_RATE_HIGH

u32

threshold for high rate

ETHTOOL_A_COALESCE_RX_USECS_HIGH

u32

delay (us), high Rx

ETHTOOL_A_COALESCE_RX_MAX_FRAMES_HIGH

u32

max packets, high Rx

ETHTOOL_A_COALESCE_TX_USECS_HIGH

u32

delay (us), high Tx

ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH

u32

max packets, high Tx

ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL

u32

rate sampling interval

ETHTOOL_A_COALESCE_USE_CQE_TX

bool

timer reset mode, Tx

ETHTOOL_A_COALESCE_USE_CQE_RX

bool

timer reset mode, Rx

ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES

u32

max aggr size, Tx

ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES

u32

max aggr packets, Tx

ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS

u32

time (us), aggr, Tx

ETHTOOL_A_COALESCE_RX_PROFILE

nested

profile of DIM, Rx

ETHTOOL_A_COALESCE_TX_PROFILE

nested

profile of DIM, Tx

Request is rejected if it attributes declared as unsupported by driver (i.e. such that the corresponding bit in ethtool_ops::supported_coalesce_params is not set), regardless of their values. Driver may impose additional constraints on coalescing parameters and their values.

Compared to requests issued via the ioctl() netlink version of this request will try harder to make sure that values specified by the user have been applied and may call the driver twice.

PAUSE_GET¶

Gets pause frame settings like ETHTOOL_GPAUSEPARAM ioctl request.

Request contents:

ETHTOOL_A_PAUSE_HEADER

nested

request header

ETHTOOL_A_PAUSE_STATS_SRC

u32

source of statistics

ETHTOOL_A_PAUSE_STATS_SRC is optional. It takes values from:

enum ethtool_mac_stats_src¶: source of ethtool MAC statistics

Constants

ETHTOOL_MAC_STATS_SRC_AGGREGATE

if device supports a MAC merge layer, this retrieves the aggregate statistics of the eMAC and pMAC. Otherwise, it retrieves just the statistics of the single (express) MAC.

ETHTOOL_MAC_STATS_SRC_EMAC

if device supports a MM layer, this retrieves the eMAC statistics. Otherwise, it retrieves the statistics of the single (express) MAC.

ETHTOOL_MAC_STATS_SRC_PMAC

if device supports a MM layer, this retrieves the pMAC statistics.

If absent from the request, stats will be provided with an ETHTOOL_A_PAUSE_STATS_SRC attribute in the response equal to ETHTOOL_MAC_STATS_SRC_AGGREGATE.

Kernel response contents:

ETHTOOL_A_PAUSE_HEADER

nested

request header

ETHTOOL_A_PAUSE_AUTONEG

bool

pause autonegotiation

ETHTOOL_A_PAUSE_RX

bool

receive pause frames

ETHTOOL_A_PAUSE_TX

bool

transmit pause frames

ETHTOOL_A_PAUSE_STATS

nested

pause statistics

ETHTOOL_A_PAUSE_STATS are reported if ETHTOOL_FLAG_STATS was set in ETHTOOL_A_HEADER_FLAGS. It will be empty if driver did not report any statistics. Drivers fill in the statistics in the following structure:

struct ethtool_pause_stats¶: statistics for IEEE 802.3x pause frames

Definition:

struct ethtool_pause_stats {
    enum ethtool_mac_stats_src src;
    u64 tx_pause_frames;
    u64 rx_pause_frames;
};

Members

src

input field denoting whether stats should be queried from the eMAC or pMAC (if the MM layer is supported). To be ignored otherwise.

tx_pause_frames

transmitted pause frame count. Reported to user space as ETHTOOL_A_PAUSE_STAT_TX_FRAMES.

Equivalent to 30.3.4.2 aPAUSEMACCtrlFramesTransmitted from the standard.

rx_pause_frames

received pause frame count. Reported to user space as ETHTOOL_A_PAUSE_STAT_RX_FRAMES. Equivalent to:

Equivalent to 30.3.4.3 aPAUSEMACCtrlFramesReceived from the standard.

Each member has a corresponding attribute defined.

PAUSE_SET¶

Sets pause parameters like ETHTOOL_GPAUSEPARAM ioctl request.

Request contents:

ETHTOOL_A_PAUSE_HEADER

nested

request header

ETHTOOL_A_PAUSE_AUTONEG

bool

pause autonegotiation

ETHTOOL_A_PAUSE_RX

bool

receive pause frames

ETHTOOL_A_PAUSE_TX

bool

transmit pause frames

EEE_GET¶

Gets Energy Efficient Ethernet settings like ETHTOOL_GEEE ioctl request.

Request contents:

ETHTOOL_A_EEE_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_EEE_HEADER

nested

request header

ETHTOOL_A_EEE_MODES_OURS

bool

supported/advertised modes

ETHTOOL_A_EEE_MODES_PEER

bool

peer advertised link modes

ETHTOOL_A_EEE_ACTIVE

bool

EEE is actively used

ETHTOOL_A_EEE_ENABLED

bool

EEE is enabled

ETHTOOL_A_EEE_TX_LPI_ENABLED

bool

Tx lpi enabled

ETHTOOL_A_EEE_TX_LPI_TIMER

u32

Tx lpi timeout (in us)

In ETHTOOL_A_EEE_MODES_OURS, mask consists of link modes for which EEE is enabled, value of link modes for which EEE is advertised. Link modes for which peer advertises EEE are listed in ETHTOOL_A_EEE_MODES_PEER (no mask). The netlink interface allows reporting EEE status for all link modes but only first 32 are provided by the ethtool_ops callback.

EEE_SET¶

Sets Energy Efficient Ethernet parameters like ETHTOOL_SEEE ioctl request.

Request contents:

ETHTOOL_A_EEE_HEADER

nested

request header

ETHTOOL_A_EEE_MODES_OURS

bool

advertised modes

ETHTOOL_A_EEE_ENABLED

bool

EEE is enabled

ETHTOOL_A_EEE_TX_LPI_ENABLED

bool

Tx lpi enabled

ETHTOOL_A_EEE_TX_LPI_TIMER

u32

Tx lpi timeout (in us)

ETHTOOL_A_EEE_MODES_OURS is used to either list link modes to advertise EEE for (if there is no mask) or specify changes to the list (if there is a mask). The netlink interface allows reporting EEE status for all link modes but only first 32 can be set at the moment as that is what the ethtool_ops callback supports.

TSINFO_GET¶

Gets timestamping information like ETHTOOL_GET_TS_INFO ioctl request.

Request contents:

ETHTOOL_A_TSINFO_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_TSINFO_HEADER

nested

request header

ETHTOOL_A_TSINFO_TIMESTAMPING

bitset

SO_TIMESTAMPING flags

ETHTOOL_A_TSINFO_TX_TYPES

bitset

supported Tx types

ETHTOOL_A_TSINFO_RX_FILTERS

bitset

supported Rx filters

ETHTOOL_A_TSINFO_PHC_INDEX

u32

PTP hw clock index

ETHTOOL_A_TSINFO_STATS

nested

HW timestamping statistics

ETHTOOL_A_TSINFO_PHC_INDEX is absent if there is no associated PHC (there is no special value for this case). The bitset attributes are omitted if they would be empty (no bit set).

Additional hardware timestamping statistics response contents:

ETHTOOL_A_TS_STAT_TX_PKTS

uint

Packets with Tx HW timestamps

ETHTOOL_A_TS_STAT_TX_LOST

uint

Tx HW timestamp not arrived count

ETHTOOL_A_TS_STAT_TX_ERR

uint

HW error request Tx timestamp count

CABLE_TEST¶

Start a cable test.

Request contents:

ETHTOOL_A_CABLE_TEST_HEADER

nested

request header

Notification contents:

An Ethernet cable typically contains 1, 2 or 4 pairs. The length of the pair can only be measured when there is a fault in the pair and hence a reflection. Information about the fault may not be available, depending on the specific hardware. Hence the contents of the notify message are mostly optional. The attributes can be repeated an arbitrary number of times, in an arbitrary order, for an arbitrary number of pairs.

The example shows the notification sent when the test is completed for a T2 cable, i.e. two pairs. One pair is OK and hence has no length information. The second pair has a fault and does have length information.

ETHTOOL_A_CABLE_TEST_HEADER

nested

reply header

ETHTOOL_A_CABLE_TEST_STATUS

u8

completed

ETHTOOL_A_CABLE_TEST_NTF_NEST

nested

all the results

ETHTOOL_A_CABLE_NEST_RESULT

nested

cable test result

ETHTOOL_A_CABLE_RESULTS_PAIR

u8

pair number

ETHTOOL_A_CABLE_RESULTS_CODE

u8

result code

ETHTOOL_A_CABLE_NEST_RESULT

nested

cable test results

ETHTOOL_A_CABLE_RESULTS_PAIR

u8

pair number

ETHTOOL_A_CABLE_RESULTS_CODE

u8

result code

ETHTOOL_A_CABLE_RESULT_SRC

u32

information source

ETHTOOL_A_CABLE_NEST_FAULT_LENGTH

nested

cable length

ETHTOOL_A_CABLE_FAULT_LENGTH_PAIR

u8

pair number

ETHTOOL_A_CABLE_FAULT_LENGTH_CM

u32

length in cm

ETHTOOL_A_CABLE_FAULT_LENGTH_SRC

u32

information source

CABLE_TEST TDR¶

Start a cable test and report raw TDR data

Request contents:

ETHTOOL_A_CABLE_TEST_TDR_HEADER

nested

reply header

ETHTOOL_A_CABLE_TEST_TDR_CFG

nested

test configuration

ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE

u32

first data distance

ETHTOOL_A_CABLE_STEP_LAST_DISTANCE

u32

last data distance

ETHTOOL_A_CABLE_STEP_STEP_DISTANCE

u32

distance of each step

ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR

u8

pair to test

The ETHTOOL_A_CABLE_TEST_TDR_CFG is optional, as well as all members of the nest. All distances are expressed in centimeters. The PHY takes the distances as a guide, and rounds to the nearest distance it actually supports. If a pair is passed, only that one pair will be tested. Otherwise all pairs are tested.

Notification contents:

Raw TDR data is gathered by sending a pulse down the cable and recording the amplitude of the reflected pulse for a given distance.

It can take a number of seconds to collect TDR data, especial if the full 100 meters is probed at 1 meter intervals. When the test is started a notification will be sent containing just ETHTOOL_A_CABLE_TEST_TDR_STATUS with the value ETHTOOL_A_CABLE_TEST_NTF_STATUS_STARTED.

When the test has completed a second notification will be sent containing ETHTOOL_A_CABLE_TEST_TDR_STATUS with the value ETHTOOL_A_CABLE_TEST_NTF_STATUS_COMPLETED and the TDR data.

The message may optionally contain the amplitude of the pulse send down the cable. This is measured in mV. A reflection should not be bigger than transmitted pulse.

Before the raw TDR data should be an ETHTOOL_A_CABLE_TDR_NEST_STEP nest containing information about the distance along the cable for the first reading, the last reading, and the step between each reading. Distances are measured in centimeters. These should be the exact values the PHY used. These may be different to what the user requested, if the native measurement resolution is greater than 1 cm.

For each step along the cable, a ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE is used to report the amplitude of the reflection for a given pair.

ETHTOOL_A_CABLE_TEST_TDR_HEADER

nested

reply header

ETHTOOL_A_CABLE_TEST_TDR_STATUS

u8

completed

ETHTOOL_A_CABLE_TEST_TDR_NTF_NEST

nested

all the results

ETHTOOL_A_CABLE_TDR_NEST_PULSE

nested

TX Pulse amplitude

ETHTOOL_A_CABLE_PULSE_mV

s16

Pulse amplitude

ETHTOOL_A_CABLE_NEST_STEP

nested

TDR step info

ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE

u32

First data distance

ETHTOOL_A_CABLE_STEP_LAST_DISTANCE

u32

Last data distance

ETHTOOL_A_CABLE_STEP_STEP_DISTANCE

u32

distance of each step

ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE

nested

Reflection amplitude

ETHTOOL_A_CABLE_RESULTS_PAIR

u8

pair number

ETHTOOL_A_CABLE_AMPLITUDE_mV

s16

Reflection amplitude

ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE

nested

Reflection amplitude

ETHTOOL_A_CABLE_RESULTS_PAIR

u8

pair number

ETHTOOL_A_CABLE_AMPLITUDE_mV

s16

Reflection amplitude

ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE

nested

Reflection amplitude

ETHTOOL_A_CABLE_RESULTS_PAIR

u8

pair number

ETHTOOL_A_CABLE_AMPLITUDE_mV

s16

Reflection amplitude

TUNNEL_INFO¶

Gets information about the tunnel state NIC is aware of.

Request contents:

ETHTOOL_A_TUNNEL_INFO_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_TUNNEL_INFO_HEADER

nested

reply header

ETHTOOL_A_TUNNEL_INFO_UDP_PORTS

nested

all UDP port tables

ETHTOOL_A_TUNNEL_UDP_TABLE

nested

one UDP port table

ETHTOOL_A_TUNNEL_UDP_TABLE_SIZE

u32

max size of the table

ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES

bitset

tunnel types which table can hold

ETHTOOL_A_TUNNEL_UDP_TABLE_ENTRY

nested

offloaded UDP port

ETHTOOL_A_TUNNEL_UDP_ENTRY_PORT

be16

UDP port

ETHTOOL_A_TUNNEL_UDP_ENTRY_TYPE

u32

tunnel type

For UDP tunnel table empty ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES indicates that the table contains static entries, hard-coded by the NIC.

FEC_GET¶

Gets FEC configuration and state like ETHTOOL_GFECPARAM ioctl request.

Request contents:

ETHTOOL_A_FEC_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_FEC_HEADER

nested

request header

ETHTOOL_A_FEC_MODES

bitset

configured modes

ETHTOOL_A_FEC_AUTO

bool

FEC mode auto selection

ETHTOOL_A_FEC_ACTIVE

u32

index of active FEC mode

ETHTOOL_A_FEC_STATS

nested

FEC statistics

ETHTOOL_A_FEC_ACTIVE is the bit index of the FEC link mode currently active on the interface. This attribute may not be present if device does not support FEC.

ETHTOOL_A_FEC_MODES and ETHTOOL_A_FEC_AUTO are only meaningful when autonegotiation is disabled. If ETHTOOL_A_FEC_AUTO is non-zero driver will select the FEC mode automatically based on the parameters of the SFP module. This is equivalent to the ETHTOOL_FEC_AUTO bit of the ioctl interface. ETHTOOL_A_FEC_MODES carry the current FEC configuration using link mode bits (rather than old ETHTOOL_FEC_* bits).

ETHTOOL_A_FEC_STATS are reported if ETHTOOL_FLAG_STATS was set in ETHTOOL_A_HEADER_FLAGS. Each attribute carries an array of 64bit statistics. First entry in the array contains the total number of events on the port, while the following entries are counters corresponding to lanes/PCS instances. The number of entries in the array will be:

0	device does not support FEC statistics
1	device does not support per-lane break down
1 + #lanes	device has full support for FEC stats

Drivers fill in the statistics in the following structure:

struct ethtool_fec_stats¶: statistics for IEEE 802.3 FEC

Definition:

struct ethtool_fec_stats {
    struct ethtool_fec_stat {
        u64 total;
        u64 lanes[ETHTOOL_MAX_LANES];
    } corrected_blocks, uncorrectable_blocks, corrected_bits;
};

Members

corrected_blocks

number of received blocks corrected by FEC Reported to user space as ETHTOOL_A_FEC_STAT_CORRECTED.

Equivalent to 30.5.1.1.17 aFECCorrectedBlocks from the standard.

uncorrectable_blocks

number of received blocks FEC was not able to correct Reported to user space as ETHTOOL_A_FEC_STAT_UNCORR.

Equivalent to 30.5.1.1.18 aFECUncorrectableBlocks from the standard.

corrected_bits

number of bits corrected by FEC Similar to corrected_blocks but counts individual bit changes, not entire FEC data blocks. This is a non-standard statistic. Reported to user space as ETHTOOL_A_FEC_STAT_CORR_BITS.

Description

For each of the above fields, the two substructure members are:

lanes: per-lane/PCS-instance counts as defined by the standard
total: error counts for the entire port, for drivers incapable of reporting
per-lane stats

Drivers should fill in either only total or per-lane statistics, core will take care of adding lane values up to produce the total.

FEC_SET¶

Sets FEC parameters like ETHTOOL_SFECPARAM ioctl request.

Request contents:

ETHTOOL_A_FEC_HEADER

nested

request header

ETHTOOL_A_FEC_MODES

bitset

configured modes

ETHTOOL_A_FEC_AUTO

bool

FEC mode auto selection

FEC_SET is only meaningful when autonegotiation is disabled. Otherwise FEC mode is selected as part of autonegotiation.

ETHTOOL_A_FEC_MODES selects which FEC mode should be used. It’s recommended to set only one bit, if multiple bits are set driver may choose between them in an implementation specific way.

ETHTOOL_A_FEC_AUTO requests the driver to choose FEC mode based on SFP module parameters. This does not mean autonegotiation.

MODULE_EEPROM_GET¶

Fetch module EEPROM data dump. This interface is designed to allow dumps of at most 1/2 page at once. This means only dumps of 128 (or less) bytes are allowed, without crossing half page boundary located at offset 128. For pages other than 0 only high 128 bytes are accessible.

Request contents:

ETHTOOL_A_MODULE_EEPROM_HEADER

nested

request header

ETHTOOL_A_MODULE_EEPROM_OFFSET

u32

offset within a page

ETHTOOL_A_MODULE_EEPROM_LENGTH

u32

amount of bytes to read

ETHTOOL_A_MODULE_EEPROM_PAGE

u8

page number

ETHTOOL_A_MODULE_EEPROM_BANK

u8

bank number

ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS

u8

page I2C address

If ETHTOOL_A_MODULE_EEPROM_BANK is not specified, bank 0 is assumed.

Kernel response contents:

ETHTOOL_A_MODULE_EEPROM_HEADER

nested

reply header

ETHTOOL_A_MODULE_EEPROM_DATA

binary

array of bytes from module EEPROM

ETHTOOL_A_MODULE_EEPROM_DATA has an attribute length equal to the amount of bytes driver actually read.

STATS_GET¶

Get standard statistics for the interface. Note that this is not a re-implementation of ETHTOOL_GSTATS which exposed driver-defined stats.

Request contents:

ETHTOOL_A_STATS_HEADER

nested

request header

ETHTOOL_A_STATS_SRC

u32

source of statistics

ETHTOOL_A_STATS_GROUPS

bitset

requested groups of stats

Kernel response contents:

ETHTOOL_A_STATS_HEADER

nested

reply header

ETHTOOL_A_STATS_SRC

u32

source of statistics

ETHTOOL_A_STATS_GRP

nested

one or more group of stats

ETHTOOL_A_STATS_GRP_ID

u32

group ID - ETHTOOL_STATS_*

ETHTOOL_A_STATS_GRP_SS_ID

u32

string set ID for names

ETHTOOL_A_STATS_GRP_STAT

nested

nest containing a statistic

ETHTOOL_A_STATS_GRP_HIST_RX

nested

histogram statistic (Rx)

ETHTOOL_A_STATS_GRP_HIST_TX

nested

histogram statistic (Tx)

Users specify which groups of statistics they are requesting via the ETHTOOL_A_STATS_GROUPS bitset. Currently defined values are:

ETHTOOL_STATS_ETH_MAC

eth-mac

Basic IEEE 802.3 MAC statistics (30.3.1.1.*)

ETHTOOL_STATS_ETH_PHY

eth-phy

Basic IEEE 802.3 PHY statistics (30.3.2.1.*)

ETHTOOL_STATS_ETH_CTRL

eth-ctrl

Basic IEEE 802.3 MAC Ctrl statistics (30.3.3.*)

ETHTOOL_STATS_RMON

rmon

RMON (RFC 2819) statistics

Each group should have a corresponding ETHTOOL_A_STATS_GRP in the reply. ETHTOOL_A_STATS_GRP_ID identifies which group’s statistics nest contains. ETHTOOL_A_STATS_GRP_SS_ID identifies the string set ID for the names of the statistics in the group, if available.

Statistics are added to the ETHTOOL_A_STATS_GRP nest under ETHTOOL_A_STATS_GRP_STAT. ETHTOOL_A_STATS_GRP_STAT should contain single 8 byte (u64) attribute inside - the type of that attribute is the statistic ID and the value is the value of the statistic. Each group has its own interpretation of statistic IDs. Attribute IDs correspond to strings from the string set identified by ETHTOOL_A_STATS_GRP_SS_ID. Complex statistics (such as RMON histogram entries) are also listed inside ETHTOOL_A_STATS_GRP and do not have a string defined in the string set.

RMON “histogram” counters count number of packets within given size range. Because RFC does not specify the ranges beyond the standard 1518 MTU devices differ in definition of buckets. For this reason the definition of packet ranges is left to each driver.

ETHTOOL_A_STATS_GRP_HIST_RX and ETHTOOL_A_STATS_GRP_HIST_TX nests contain the following attributes:

ETHTOOL_A_STATS_RMON_HIST_BKT_LOW

u32

low bound of the packet size bucket

ETHTOOL_A_STATS_RMON_HIST_BKT_HI

u32

high bound of the bucket

ETHTOOL_A_STATS_RMON_HIST_VAL

u64

packet counter

Low and high bounds are inclusive, for example:

RFC statistic

low

high

etherStatsPkts64Octets

0

64

etherStatsPkts512to1023Octets

512

1023

ETHTOOL_A_STATS_SRC is optional. Similar to PAUSE_GET, it takes values from enum ethtool_mac_stats_src. If absent from the request, stats will be provided with an ETHTOOL_A_STATS_SRC attribute in the response equal to ETHTOOL_MAC_STATS_SRC_AGGREGATE.

PHC_VCLOCKS_GET¶

Query device PHC virtual clocks information.

Request contents:

ETHTOOL_A_PHC_VCLOCKS_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_PHC_VCLOCKS_HEADER

nested

reply header

ETHTOOL_A_PHC_VCLOCKS_NUM

u32

PHC virtual clocks number

ETHTOOL_A_PHC_VCLOCKS_INDEX

s32

PHC index array

MODULE_GET¶

Gets transceiver module parameters.

Request contents:

ETHTOOL_A_MODULE_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_MODULE_HEADER

nested

reply header

ETHTOOL_A_MODULE_POWER_MODE_POLICY

u8

power mode policy

ETHTOOL_A_MODULE_POWER_MODE

u8

operational power mode

The optional ETHTOOL_A_MODULE_POWER_MODE_POLICY attribute encodes the transceiver module power mode policy enforced by the host. The default policy is driver-dependent, but “auto” is the recommended default and it should be implemented by new drivers and drivers where conformance to a legacy behavior is not critical.

The optional ETHTHOOL_A_MODULE_POWER_MODE attribute encodes the operational power mode policy of the transceiver module. It is only reported when a module is plugged-in. Possible values are:

enum ethtool_module_power_mode¶: plug-in module power mode

Constants

ETHTOOL_MODULE_POWER_MODE_LOW: Module is in low power mode.
ETHTOOL_MODULE_POWER_MODE_HIGH: Module is in high power mode.

MODULE_SET¶

Sets transceiver module parameters.

Request contents:

ETHTOOL_A_MODULE_HEADER

nested

request header

ETHTOOL_A_MODULE_POWER_MODE_POLICY

u8

power mode policy

When set, the optional ETHTOOL_A_MODULE_POWER_MODE_POLICY attribute is used to set the transceiver module power policy enforced by the host. Possible values are:

enum ethtool_module_power_mode_policy¶: plug-in module power mode policy

Constants

ETHTOOL_MODULE_POWER_MODE_POLICY_HIGH: Module is always in high power mode.
ETHTOOL_MODULE_POWER_MODE_POLICY_AUTO: Module is transitioned by the host to high power mode when the first port using it is put administratively up and to low power mode when the last port using it is put administratively down.

For SFF-8636 modules, low power mode is forced by the host according to table 6-10 in revision 2.10a of the specification.

For CMIS modules, low power mode is forced by the host according to table 6-12 in revision 5.0 of the specification.

PSE_GET¶

Gets PSE attributes.

Request contents:

ETHTOOL_A_PSE_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_PSE_HEADER

nested

reply header

ETHTOOL_A_PODL_PSE_ADMIN_STATE

u32

Operational state of the PoDL PSE functions

ETHTOOL_A_PODL_PSE_PW_D_STATUS

u32

power detection status of the PoDL PSE.

ETHTOOL_A_C33_PSE_ADMIN_STATE

u32

Operational state of the PoE PSE functions.

ETHTOOL_A_C33_PSE_PW_D_STATUS

u32

power detection status of the PoE PSE.

ETHTOOL_A_C33_PSE_PW_CLASS

u32

power class of the PoE PSE.

ETHTOOL_A_C33_PSE_ACTUAL_PW

u32

actual power drawn on the PoE PSE.

ETHTOOL_A_C33_PSE_EXT_STATE

u32

power extended state of the PoE PSE.

ETHTOOL_A_C33_PSE_EXT_SUBSTATE

u32

power extended substatus of the PoE PSE.

ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT

u32

currently configured power limit of the PoE PSE.

ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES

nested

Supported power limit configuration ranges.

When set, the optional ETHTOOL_A_PODL_PSE_ADMIN_STATE attribute identifies the operational state of the PoDL PSE functions. The operational state of the PSE function can be changed using the ETHTOOL_A_PODL_PSE_ADMIN_CONTROL action. This attribute corresponds to IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState. Possible values are:

enum ethtool_podl_pse_admin_state¶: operational state of the PoDL PSE functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState

Constants

ETHTOOL_PODL_PSE_ADMIN_STATE_UNKNOWN: state of PoDL PSE functions are unknown
ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED: PoDL PSE functions are disabled
ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED: PoDL PSE functions are enabled

The same goes for ETHTOOL_A_C33_PSE_ADMIN_STATE implementing IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState.

enum ethtool_c33_pse_admin_state¶: operational state of the PoDL PSE functions. IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState

Constants

ETHTOOL_C33_PSE_ADMIN_STATE_UNKNOWN: state of PSE functions is unknown
ETHTOOL_C33_PSE_ADMIN_STATE_DISABLED: PSE functions are disabled
ETHTOOL_C33_PSE_ADMIN_STATE_ENABLED: PSE functions are enabled

When set, the optional ETHTOOL_A_PODL_PSE_PW_D_STATUS attribute identifies the power detection status of the PoDL PSE. The status depend on internal PSE state machine and automatic PD classification support. This attribute corresponds to IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus. Possible values are:

enum ethtool_podl_pse_pw_d_status¶: power detection status of the PoDL PSE. IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus:

Constants

ETHTOOL_PODL_PSE_PW_D_STATUS_UNKNOWN: PoDL PSE
ETHTOOL_PODL_PSE_PW_D_STATUS_DISABLED: “The enumeration “disabled” is asserted true when the PoDL PSE state diagram variable mr_pse_enable is false”
ETHTOOL_PODL_PSE_PW_D_STATUS_SEARCHING: “The enumeration “searching” is asserted true when either of the PSE state diagram variables pi_detecting or pi_classifying is true.”
ETHTOOL_PODL_PSE_PW_D_STATUS_DELIVERING: “The enumeration “deliveringPower” is asserted true when the PoDL PSE state diagram variable pi_powered is true.”
ETHTOOL_PODL_PSE_PW_D_STATUS_SLEEP: “The enumeration “sleep” is asserted true when the PoDL PSE state diagram variable pi_sleeping is true.”
ETHTOOL_PODL_PSE_PW_D_STATUS_IDLE: “The enumeration “idle” is asserted true when the logical combination of the PoDL PSE state diagram variables pi_prebiased*!pi_sleeping is true.”
ETHTOOL_PODL_PSE_PW_D_STATUS_ERROR: “The enumeration “error” is asserted true when the PoDL PSE state diagram variable overload_held is true.”

The same goes for ETHTOOL_A_C33_PSE_ADMIN_PW_D_STATUS implementing IEEE 802.3-2022 30.9.1.1.5 aPSEPowerDetectionStatus.

enum ethtool_c33_pse_pw_d_status¶: power detection status of the PSE. IEEE 802.3-2022 30.9.1.1.3 aPoDLPSEPowerDetectionStatus:

Constants

ETHTOOL_C33_PSE_PW_D_STATUS_UNKNOWN: PSE status is unknown
ETHTOOL_C33_PSE_PW_D_STATUS_DISABLED: The enumeration “disabled” indicates that the PSE State diagram is in the state DISABLED.
ETHTOOL_C33_PSE_PW_D_STATUS_SEARCHING: The enumeration “searching” indicates the PSE State diagram is in a state other than those listed.
ETHTOOL_C33_PSE_PW_D_STATUS_DELIVERING: The enumeration “deliveringPower” indicates that the PSE State diagram is in the state POWER_ON.
ETHTOOL_C33_PSE_PW_D_STATUS_TEST: The enumeration “test” indicates that the PSE State diagram is in the state TEST_MODE.
ETHTOOL_C33_PSE_PW_D_STATUS_FAULT: The enumeration “fault” indicates that the PSE State diagram is in the state TEST_ERROR.
ETHTOOL_C33_PSE_PW_D_STATUS_OTHERFAULT: The enumeration “otherFault” indicates that the PSE State diagram is in the state IDLE due to the variable error_condition = true.

When set, the optional ETHTOOL_A_C33_PSE_PW_CLASS attribute identifies the power class of the C33 PSE. It depends on the class negotiated between the PSE and the PD. This attribute corresponds to IEEE 802.3-2022 30.9.1.1.8 aPSEPowerClassification.

When set, the optional ETHTOOL_A_C33_PSE_ACTUAL_PW attribute identifies the actual power drawn by the C33 PSE. This attribute corresponds to IEEE 802.3-2022 30.9.1.1.23 aPSEActualPower. Actual power is reported in mW.

When set, the optional ETHTOOL_A_C33_PSE_EXT_STATE attribute identifies the extended error state of the C33 PSE. Possible values are:

enum ethtool_c33_pse_ext_state¶: groups of PSE extended states functions. IEEE 802.3-2022 33.2.4.4 Variables

Constants

ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION: Group of error_condition states
ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID: Group of mr_mps_valid states
ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE: Group of mr_pse_enable states
ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED: Group of option_detect_ted states
ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM: Group of option_vport_lim states
ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED: Group of ovld_detected states
ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE: Group of pd_dll_power_type states
ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE: Group of power_not_available states
ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED: Group of short_detected states

When set, the optional ETHTOOL_A_C33_PSE_EXT_SUBSTATE attribute identifies the extended error state of the C33 PSE. Possible values are: Possible values are:

enum ethtool_c33_pse_ext_substate_error_condition¶: error_condition states functions. IEEE 802.3-2022 33.2.4.4 Variables

Constants

ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT: Non-existing port number
ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT: Undefined port
ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT: Internal hardware fault

ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON

Communication error after force on

ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS: Unknown port status
ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF: Host crash turn off

ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN

Host crash force shutdown

ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE: Configuration change
ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP: Over temperature detected

Description

error_condition is a variable indicating the status of implementation-specific fault conditions or optionally other system faults that prevent the PSE from meeting the specifications in Table 33–11 and that require the PSE not to source power. These error conditions are different from those monitored by the state diagrams in Figure 33–10.

enum ethtool_c33_pse_ext_substate_mr_pse_enable¶: mr_pse_enable states functions. IEEE 802.3-2022 33.2.4.4 Variables

Constants

ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE: Disable pin active

Description

mr_pse_enable is control variable that selects PSE operation and test functions.

enum ethtool_c33_pse_ext_substate_option_detect_ted¶: option_detect_ted states functions. IEEE 802.3-2022 33.2.4.4 Variables

Constants

ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS: Detection in process

ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR

Connection check error

Description

option_detect_ted is a variable indicating if detection can be performed by the PSE during the ted_timer interval.

enum ethtool_c33_pse_ext_substate_option_vport_lim¶: option_vport_lim states functions. IEEE 802.3-2022 33.2.4.4 Variables

Constants

ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE: Main supply voltage is high
ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE: Main supply voltage is low
ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION: Voltage injection into the port

Description

option_vport_lim is an optional variable indicates if VPSE is out of the operating range during normal operating state.

enum ethtool_c33_pse_ext_substate_ovld_detected¶: ovld_detected states functions. IEEE 802.3-2022 33.2.4.4 Variables

Constants

ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD: Overload state

Description

ovld_detected is a variable indicating if the PSE output current has been in an overload condition (see 33.2.7.6) for at least TCUT of a one-second sliding time.

enum ethtool_c33_pse_ext_substate_power_not_available¶: power_not_available states functions. IEEE 802.3-2022 33.2.4.4 Variables

Constants

ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED: Power budget exceeded for the controller

ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET

Configured port power limit exceeded controller power budget

ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT

Power request from PD exceeds port limit

ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT: Power denied due to Hardware power limit

Description

power_not_available is a variable that is asserted in an implementation-dependent manner when the PSE is no longer capable of sourcing sufficient power to support the attached PD. Sufficient power is defined by classification; see 33.2.6.

enum ethtool_c33_pse_ext_substate_short_detected¶: short_detected states functions. IEEE 802.3-2022 33.2.4.4 Variables

Constants

ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION: Short condition was detected

Description

short_detected is a variable indicating if the PSE output current has been in a short circuit condition for TLIM within a sliding window (see 33.2.7.7).

When set, the optional ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT attribute identifies the C33 PSE power limit in mW.

When set the optional ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES nested attribute identifies the C33 PSE power limit ranges through ETHTOOL_A_C33_PSE_PWR_VAL_LIMIT_RANGE_MIN and ETHTOOL_A_C33_PSE_PWR_VAL_LIMIT_RANGE_MAX. If the controller works with fixed classes, the min and max values will be equal.

PSE_SET¶

Sets PSE parameters.

Request contents:

ETHTOOL_A_PSE_HEADER

nested

request header

ETHTOOL_A_PODL_PSE_ADMIN_CONTROL

u32

Control PoDL PSE Admin state

ETHTOOL_A_C33_PSE_ADMIN_CONTROL

u32

Control PSE Admin state

ETHTOOL_A_C33_PSE_AVAIL_PWR_LIMIT

u32

Control PoE PSE available power limit

When set, the optional ETHTOOL_A_PODL_PSE_ADMIN_CONTROL attribute is used to control PoDL PSE Admin functions. This option implements IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl. See ETHTOOL_A_PODL_PSE_ADMIN_STATE for supported values.

The same goes for ETHTOOL_A_C33_PSE_ADMIN_CONTROL implementing IEEE 802.3-2022 30.9.1.2.1 acPSEAdminControl.

When set, the optional ETHTOOL_A_C33_PSE_AVAIL_PWR_LIMIT attribute is used to control the available power value limit for C33 PSE in milliwatts. This attribute corresponds to the pse_available_power variable described in IEEE 802.3-2022 33.2.4.4 Variables and pse_avail_pwr in 145.2.5.4 Variables, which are described in power classes.

It was decided to use milliwatts for this interface to unify it with other power monitoring interfaces, which also use milliwatts, and to align with various existing products that document power consumption in watts rather than classes. If power limit configuration based on classes is needed, the conversion can be done in user space, for example by ethtool.

RSS_GET¶

Get indirection table, hash key and hash function info associated with a RSS context of an interface similar to ETHTOOL_GRSSH ioctl request.

Request contents:

`ETHTOOL_A_RSS_HEADER`	nested	request header
`ETHTOOL_A_RSS_CONTEXT`	u32	context number
`ETHTOOL_A_RSS_START_CONTEXT`	u32	start context number (dumps)

ETHTOOL_A_RSS_CONTEXT specifies which RSS context number to query, if not set context 0 (the main context) is queried. Dumps can be filtered by device (only listing contexts of a given netdev). Filtering single context number is not supported but ETHTOOL_A_RSS_START_CONTEXT can be used to start dumping context from the given number (primarily used to ignore context 0s and only dump additional contexts).

Kernel response contents:

`ETHTOOL_A_RSS_HEADER`	nested	reply header
`ETHTOOL_A_RSS_CONTEXT`	u32	context number
`ETHTOOL_A_RSS_HFUNC`	u32	RSS hash func
`ETHTOOL_A_RSS_INDIR`	binary	Indir table bytes
`ETHTOOL_A_RSS_HKEY`	binary	Hash key bytes
`ETHTOOL_A_RSS_INPUT_XFRM`	u32	RSS input data transformation

ETHTOOL_A_RSS_HFUNC attribute is bitmap indicating the hash function being used. Current supported options are toeplitz, xor or crc32. ETHTOOL_A_RSS_INDIR attribute returns RSS indirection table where each byte indicates queue number. ETHTOOL_A_RSS_INPUT_XFRM attribute is a bitmap indicating the type of transformation applied to the input protocol fields before given to the RSS hfunc. Current supported option is symmetric-xor.

PLCA_GET_CFG¶

Gets the IEEE 802.3cg-2019 Clause 148 Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) attributes.

Request contents:

ETHTOOL_A_PLCA_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_PLCA_HEADER

nested

reply header

ETHTOOL_A_PLCA_VERSION

u16

Supported PLCA management interface standard/version

ETHTOOL_A_PLCA_ENABLED

u8

PLCA Admin State

ETHTOOL_A_PLCA_NODE_ID

u32

PLCA unique local node ID

ETHTOOL_A_PLCA_NODE_CNT

u32

Number of PLCA nodes on the network, including the coordinator

ETHTOOL_A_PLCA_TO_TMR

u32

Transmit Opportunity Timer value in bit-times (BT)

ETHTOOL_A_PLCA_BURST_CNT

u32

Number of additional packets the node is allowed to send within a single TO

ETHTOOL_A_PLCA_BURST_TMR

u32

Time to wait for the MAC to transmit a new frame before terminating the burst

When set, the optional ETHTOOL_A_PLCA_VERSION attribute indicates which standard and version the PLCA management interface complies to. When not set, the interface is vendor-specific and (possibly) supplied by the driver. The OPEN Alliance SIG specifies a standard register map for 10BASE-T1S PHYs embedding the PLCA Reconciliation Sublayer. See “10BASE-T1S PLCA Management Registers” at https://www.opensig.org/about/specifications/.

When set, the optional ETHTOOL_A_PLCA_ENABLED attribute indicates the administrative state of the PLCA RS. When not set, the node operates in “plain” CSMA/CD mode. This option is corresponding to IEEE 802.3cg-2019 30.16.1.1.1 aPLCAAdminState / 30.16.1.2.1 acPLCAAdminControl.

When set, the optional ETHTOOL_A_PLCA_NODE_ID attribute indicates the configured local node ID of the PHY. This ID determines which transmit opportunity (TO) is reserved for the node to transmit into. This option is corresponding to IEEE 802.3cg-2019 30.16.1.1.4 aPLCALocalNodeID. The valid range for this attribute is [0 .. 255] where 255 means “not configured”.

When set, the optional ETHTOOL_A_PLCA_NODE_CNT attribute indicates the configured maximum number of PLCA nodes on the mixing-segment. This number determines the total number of transmit opportunities generated during a PLCA cycle. This attribute is relevant only for the PLCA coordinator, which is the node with aPLCALocalNodeID set to 0. Follower nodes ignore this setting. This option is corresponding to IEEE 802.3cg-2019 30.16.1.1.3 aPLCANodeCount. The valid range for this attribute is [1 .. 255].

When set, the optional ETHTOOL_A_PLCA_TO_TMR attribute indicates the configured value of the transmit opportunity timer in bit-times. This value must be set equal across all nodes sharing the medium for PLCA to work correctly. This option is corresponding to IEEE 802.3cg-2019 30.16.1.1.5 aPLCATransmitOpportunityTimer. The valid range for this attribute is [0 .. 255].

When set, the optional ETHTOOL_A_PLCA_BURST_CNT attribute indicates the configured number of extra packets that the node is allowed to send during a single transmit opportunity. By default, this attribute is 0, meaning that the node can only send a single frame per TO. When greater than 0, the PLCA RS keeps the TO after any transmission, waiting for the MAC to send a new frame for up to aPLCABurstTimer BTs. This can only happen a number of times per PLCA cycle up to the value of this parameter. After that, the burst is over and the normal counting of TOs resumes. This option is corresponding to IEEE 802.3cg-2019 30.16.1.1.6 aPLCAMaxBurstCount. The valid range for this attribute is [0 .. 255].

When set, the optional ETHTOOL_A_PLCA_BURST_TMR attribute indicates how many bit-times the PLCA RS waits for the MAC to initiate a new transmission when aPLCAMaxBurstCount is greater than 0. If the MAC fails to send a new frame within this time, the burst ends and the counting of TOs resumes. Otherwise, the new frame is sent as part of the current burst. This option is corresponding to IEEE 802.3cg-2019 30.16.1.1.7 aPLCABurstTimer. The valid range for this attribute is [0 .. 255]. Although, the value should be set greater than the Inter-Frame-Gap (IFG) time of the MAC (plus some margin) for PLCA burst mode to work as intended.

PLCA_SET_CFG¶

Sets PLCA RS parameters.

Request contents:

ETHTOOL_A_PLCA_HEADER

nested

request header

ETHTOOL_A_PLCA_ENABLED

u8

PLCA Admin State

ETHTOOL_A_PLCA_NODE_ID

u8

PLCA unique local node ID

ETHTOOL_A_PLCA_NODE_CNT

u8

Number of PLCA nodes on the network, including the coordinator

ETHTOOL_A_PLCA_TO_TMR

u8

Transmit Opportunity Timer value in bit-times (BT)

ETHTOOL_A_PLCA_BURST_CNT

u8

Number of additional packets the node is allowed to send within a single TO

ETHTOOL_A_PLCA_BURST_TMR

u8

Time to wait for the MAC to transmit a new frame before terminating the burst

For a description of each attribute, see PLCA_GET_CFG.

PLCA_GET_STATUS¶

Gets PLCA RS status information.

Request contents:

ETHTOOL_A_PLCA_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_PLCA_HEADER

nested

reply header

ETHTOOL_A_PLCA_STATUS

u8

PLCA RS operational status

When set, the ETHTOOL_A_PLCA_STATUS attribute indicates whether the node is detecting the presence of the BEACON on the network. This flag is corresponding to IEEE 802.3cg-2019 30.16.1.1.2 aPLCAStatus.

MM_GET¶

Retrieve 802.3 MAC Merge parameters.

Request contents:

ETHTOOL_A_MM_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_MM_HEADER

nested

request header

ETHTOOL_A_MM_PMAC_ENABLED

bool

set if RX of preemptible and SMD-V frames is enabled

ETHTOOL_A_MM_TX_ENABLED

bool

set if TX of preemptible frames is administratively enabled (might be inactive if verification failed)

ETHTOOL_A_MM_TX_ACTIVE

bool

set if TX of preemptible frames is operationally enabled

ETHTOOL_A_MM_TX_MIN_FRAG_SIZE

u32

minimum size of transmitted non-final fragments, in octets

ETHTOOL_A_MM_RX_MIN_FRAG_SIZE

u32

minimum size of received non-final fragments, in octets

ETHTOOL_A_MM_VERIFY_ENABLED

bool

set if TX of SMD-V frames is administratively enabled

ETHTOOL_A_MM_VERIFY_STATUS

u8

state of the verification function

ETHTOOL_A_MM_VERIFY_TIME

u32

delay between verification attempts

ETHTOOL_A_MM_MAX_VERIFY_TIME`

u32

maximum verification interval supported by device

ETHTOOL_A_MM_STATS

nested

IEEE 802.3-2018 subclause 30.14.1 oMACMergeEntity statistics counters

The attributes are populated by the device driver through the following structure:

struct ethtool_mm_state¶: 802.3 MAC merge layer state

Definition:

struct ethtool_mm_state {
    u32 verify_time;
    u32 max_verify_time;
    enum ethtool_mm_verify_status verify_status;
    bool tx_enabled;
    bool tx_active;
    bool pmac_enabled;
    bool verify_enabled;
    u32 tx_min_frag_size;
    u32 rx_min_frag_size;
};

Members

verify_time

wait time between verification attempts in ms (according to clause 30.14.1.6 aMACMergeVerifyTime)

max_verify_time

maximum accepted value for the verify_time variable in set requests

verify_status

state of the verification state machine of the MM layer (according to clause 30.14.1.2 aMACMergeStatusVerify)

tx_enabled

set if the MM layer is administratively enabled in the TX direction (according to clause 30.14.1.3 aMACMergeEnableTx)

tx_active

set if the MM layer is enabled in the TX direction, which makes FP possible (according to 30.14.1.5 aMACMergeStatusTx). This should be true if MM is enabled, and the verification status is either verified, or disabled.

pmac_enabled

set if the preemptible MAC is powered on and is able to receive preemptible packets and respond to verification frames.

verify_enabled

set if the Verify function of the MM layer (which sends SMD-V verification requests) is administratively enabled (regardless of whether it is currently in the ETHTOOL_MM_VERIFY_STATUS_DISABLED state or not), according to clause 30.14.1.4 aMACMergeVerifyDisableTx (but using positive rather than negative logic). The device should always respond to received SMD-V requests as long as pmac_enabled is set.

tx_min_frag_size

the minimum size of non-final mPacket fragments that the link partner supports receiving, expressed in octets. Compared to the definition from clause 30.14.1.7 aMACMergeAddFragSize which is expressed in the range 0 to 3 (requiring a translation to the size in octets according to the formula 64 * (1 + addFragSize) - 4), a value in a continuous and unbounded range can be specified here.

rx_min_frag_size

the minimum size of non-final mPacket fragments that this device supports receiving, expressed in octets.

The ETHTOOL_A_MM_VERIFY_STATUS will report one of the values from

enum ethtool_mm_verify_status¶: status of MAC Merge Verify function

Constants

ETHTOOL_MM_VERIFY_STATUS_UNKNOWN

verification status is unknown

ETHTOOL_MM_VERIFY_STATUS_INITIAL

the 802.3 Verify State diagram is in the state INIT_VERIFICATION

ETHTOOL_MM_VERIFY_STATUS_VERIFYING

the Verify State diagram is in the state VERIFICATION_IDLE, SEND_VERIFY or WAIT_FOR_RESPONSE

ETHTOOL_MM_VERIFY_STATUS_SUCCEEDED

indicates that the Verify State diagram is in the state VERIFIED

ETHTOOL_MM_VERIFY_STATUS_FAILED

the Verify State diagram is in the state VERIFY_FAIL

ETHTOOL_MM_VERIFY_STATUS_DISABLED

verification of preemption operation is disabled

If ETHTOOL_A_MM_VERIFY_ENABLED was passed as false in the MM_SET command, ETHTOOL_A_MM_VERIFY_STATUS will report either ETHTOOL_MM_VERIFY_STATUS_INITIAL or ETHTOOL_MM_VERIFY_STATUS_DISABLED, otherwise it should report one of the other states.

It is recommended that drivers start with the pMAC disabled, and enable it upon user space request. It is also recommended that user space does not depend upon the default values from ETHTOOL_MSG_MM_GET requests.

ETHTOOL_A_MM_STATS are reported if ETHTOOL_FLAG_STATS was set in ETHTOOL_A_HEADER_FLAGS. The attribute will be empty if driver did not report any statistics. Drivers fill in the statistics in the following structure:

struct ethtool_mm_stats¶: 802.3 MAC merge layer statistics

Definition:

struct ethtool_mm_stats {
    u64 MACMergeFrameAssErrorCount;
    u64 MACMergeFrameSmdErrorCount;
    u64 MACMergeFrameAssOkCount;
    u64 MACMergeFragCountRx;
    u64 MACMergeFragCountTx;
    u64 MACMergeHoldCount;
};

Members

MACMergeFrameAssErrorCount

received MAC frames with reassembly errors

MACMergeFrameSmdErrorCount

received MAC frames/fragments rejected due to unknown or incorrect SMD

MACMergeFrameAssOkCount

received MAC frames that were successfully reassembled and passed up

MACMergeFragCountRx

number of additional correct SMD-C mPackets received due to preemption

MACMergeFragCountTx

number of additional mPackets sent due to preemption

MACMergeHoldCount

number of times the MM layer entered the HOLD state, which blocks transmission of preemptible traffic

MM_SET¶

Modifies the configuration of the 802.3 MAC Merge layer.

Request contents:

ETHTOOL_A_MM_VERIFY_TIME

u32

see MM_GET description

ETHTOOL_A_MM_VERIFY_ENABLED

bool

see MM_GET description

ETHTOOL_A_MM_TX_ENABLED

bool

see MM_GET description

ETHTOOL_A_MM_PMAC_ENABLED

bool

see MM_GET description

ETHTOOL_A_MM_TX_MIN_FRAG_SIZE

u32

see MM_GET description

The attributes are propagated to the driver through the following structure:

struct ethtool_mm_cfg¶: 802.3 MAC merge layer configuration

Definition:

struct ethtool_mm_cfg {
    u32 verify_time;
    bool verify_enabled;
    bool tx_enabled;
    bool pmac_enabled;
    u32 tx_min_frag_size;
};

Members

verify_time: see struct ethtool_mm_state
verify_enabled: see struct ethtool_mm_state
tx_enabled: see struct ethtool_mm_state
pmac_enabled: see struct ethtool_mm_state
tx_min_frag_size: see struct ethtool_mm_state

MODULE_FW_FLASH_ACT¶

Flashes transceiver module firmware.

Request contents:

ETHTOOL_A_MODULE_FW_FLASH_HEADER

nested

request header

ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME

string

firmware image file name

ETHTOOL_A_MODULE_FW_FLASH_PASSWORD

u32

transceiver module password

The firmware update process consists of three logical steps:

Downloading a firmware image to the transceiver module and validating it.
Running the firmware image.
Committing the firmware image so that it is run upon reset.

When flash command is given, those three steps are taken in that order.

This message merely schedules the update process and returns immediately without blocking. The process then runs asynchronously. Since it can take several minutes to complete, during the update process notifications are emitted from the kernel to user space updating it about the status and progress.

The ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME attribute encodes the firmware image file name. The firmware image is downloaded to the transceiver module, validated, run and committed.

The optional ETHTOOL_A_MODULE_FW_FLASH_PASSWORD attribute encodes a password that might be required as part of the transceiver module firmware update process.

The firmware update process can take several minutes to complete. Therefore, during the update process notifications are emitted from the kernel to user space updating it about the status and progress.

Notification contents:

ETHTOOL_A_MODULE_FW_FLASH_HEADER

nested

reply header

ETHTOOL_A_MODULE_FW_FLASH_STATUS

u32

status

ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG

string

status message

ETHTOOL_A_MODULE_FW_FLASH_DONE

uint

progress

ETHTOOL_A_MODULE_FW_FLASH_TOTAL

uint

total

The ETHTOOL_A_MODULE_FW_FLASH_STATUS attribute encodes the current status of the firmware update process. Possible values are:

enum ethtool_module_fw_flash_status¶: plug-in module firmware flashing status

Constants

ETHTOOL_MODULE_FW_FLASH_STATUS_STARTED: The firmware flashing process has started.
ETHTOOL_MODULE_FW_FLASH_STATUS_IN_PROGRESS: The firmware flashing process is in progress.
ETHTOOL_MODULE_FW_FLASH_STATUS_COMPLETED: The firmware flashing process was completed successfully.
ETHTOOL_MODULE_FW_FLASH_STATUS_ERROR: The firmware flashing process was stopped due to an error.

The ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG attribute encodes a status message string.

The ETHTOOL_A_MODULE_FW_FLASH_DONE and ETHTOOL_A_MODULE_FW_FLASH_TOTAL attributes encode the completed and total amount of work, respectively.

PHY_GET¶

Retrieve information about a given Ethernet PHY sitting on the link. The DO operation returns all available information about dev->phydev. User can also specify a PHY_INDEX, in which case the DO request returns information about that specific PHY.

As there can be more than one PHY, the DUMP operation can be used to list the PHYs present on a given interface, by passing an interface index or name in the dump request.

For more information, refer to PHY link topology

Request contents:

ETHTOOL_A_PHY_HEADER

nested

request header

Kernel response contents:

ETHTOOL_A_PHY_HEADER

nested

request header

ETHTOOL_A_PHY_INDEX

u32

the phy’s unique index, that can be used for phy-specific requests

ETHTOOL_A_PHY_DRVNAME

string

the phy driver name

ETHTOOL_A_PHY_NAME

string

the phy device name

ETHTOOL_A_PHY_UPSTREAM_TYPE

u32

the type of device this phy is connected to

ETHTOOL_A_PHY_UPSTREAM_INDEX

u32

the PHY index of the upstream PHY

ETHTOOL_A_PHY_UPSTREAM_SFP_NAME

string

if this PHY is connected to its parent PHY through an SFP bus, the name of this sfp bus

ETHTOOL_A_PHY_DOWNSTREAM_SFP_NAME

string

if the phy controls an sfp bus, the name of the sfp bus

When ETHTOOL_A_PHY_UPSTREAM_TYPE is PHY_UPSTREAM_PHY, the PHY’s parent is another PHY.

Request translation¶

The following table maps ioctl commands to netlink commands providing their functionality. Entries with “n/a” in right column are commands which do not have their netlink replacement yet. Entries which “n/a” in the left column are netlink only.

ioctl command

netlink command

ETHTOOL_GSET

ETHTOOL_MSG_LINKINFO_GET ETHTOOL_MSG_LINKMODES_GET

ETHTOOL_SSET

ETHTOOL_MSG_LINKINFO_SET ETHTOOL_MSG_LINKMODES_SET

ETHTOOL_GDRVINFO

n/a

ETHTOOL_GREGS

n/a

ETHTOOL_GWOL

ETHTOOL_MSG_WOL_GET

ETHTOOL_SWOL

ETHTOOL_MSG_WOL_SET

ETHTOOL_GMSGLVL

ETHTOOL_MSG_DEBUG_GET

ETHTOOL_SMSGLVL

ETHTOOL_MSG_DEBUG_SET

ETHTOOL_NWAY_RST

n/a

ETHTOOL_GLINK

ETHTOOL_MSG_LINKSTATE_GET

ETHTOOL_GEEPROM

n/a

ETHTOOL_SEEPROM

n/a

ETHTOOL_GCOALESCE

ETHTOOL_MSG_COALESCE_GET

ETHTOOL_SCOALESCE

ETHTOOL_MSG_COALESCE_SET

ETHTOOL_GRINGPARAM

ETHTOOL_MSG_RINGS_GET

ETHTOOL_SRINGPARAM

ETHTOOL_MSG_RINGS_SET

ETHTOOL_GPAUSEPARAM

ETHTOOL_MSG_PAUSE_GET

ETHTOOL_SPAUSEPARAM

ETHTOOL_MSG_PAUSE_SET

ETHTOOL_GRXCSUM

ETHTOOL_MSG_FEATURES_GET

ETHTOOL_SRXCSUM

ETHTOOL_MSG_FEATURES_SET

ETHTOOL_GTXCSUM

ETHTOOL_MSG_FEATURES_GET

ETHTOOL_STXCSUM

ETHTOOL_MSG_FEATURES_SET

ETHTOOL_GSG

ETHTOOL_MSG_FEATURES_GET

ETHTOOL_SSG

ETHTOOL_MSG_FEATURES_SET

ETHTOOL_TEST

n/a

ETHTOOL_GSTRINGS

ETHTOOL_MSG_STRSET_GET

ETHTOOL_PHYS_ID

n/a

ETHTOOL_GSTATS

n/a

ETHTOOL_GTSO

ETHTOOL_MSG_FEATURES_GET

ETHTOOL_STSO

ETHTOOL_MSG_FEATURES_SET

ETHTOOL_GPERMADDR

rtnetlink RTM_GETLINK

ETHTOOL_GUFO

ETHTOOL_MSG_FEATURES_GET

ETHTOOL_SUFO

ETHTOOL_MSG_FEATURES_SET

ETHTOOL_GGSO

ETHTOOL_MSG_FEATURES_GET

ETHTOOL_SGSO

ETHTOOL_MSG_FEATURES_SET

ETHTOOL_GFLAGS

ETHTOOL_MSG_FEATURES_GET

ETHTOOL_SFLAGS

ETHTOOL_MSG_FEATURES_SET

ETHTOOL_GPFLAGS

ETHTOOL_MSG_PRIVFLAGS_GET

ETHTOOL_SPFLAGS

ETHTOOL_MSG_PRIVFLAGS_SET

ETHTOOL_GRXFH

n/a

ETHTOOL_SRXFH

n/a

ETHTOOL_GGRO

ETHTOOL_MSG_FEATURES_GET

ETHTOOL_SGRO

ETHTOOL_MSG_FEATURES_SET

ETHTOOL_GRXRINGS

n/a

ETHTOOL_GRXCLSRLCNT

n/a

ETHTOOL_GRXCLSRULE

n/a

ETHTOOL_GRXCLSRLALL

n/a

ETHTOOL_SRXCLSRLDEL

n/a

ETHTOOL_SRXCLSRLINS

n/a

ETHTOOL_FLASHDEV

n/a

ETHTOOL_RESET

n/a

ETHTOOL_SRXNTUPLE

n/a

ETHTOOL_GRXNTUPLE

n/a

ETHTOOL_GSSET_INFO

ETHTOOL_MSG_STRSET_GET

ETHTOOL_GRXFHINDIR

n/a

ETHTOOL_SRXFHINDIR

n/a

ETHTOOL_GFEATURES

ETHTOOL_MSG_FEATURES_GET

ETHTOOL_SFEATURES

ETHTOOL_MSG_FEATURES_SET

ETHTOOL_GCHANNELS

ETHTOOL_MSG_CHANNELS_GET

ETHTOOL_SCHANNELS

ETHTOOL_MSG_CHANNELS_SET

ETHTOOL_SET_DUMP

n/a

ETHTOOL_GET_DUMP_FLAG

n/a

ETHTOOL_GET_DUMP_DATA

n/a

ETHTOOL_GET_TS_INFO

ETHTOOL_MSG_TSINFO_GET

ETHTOOL_GMODULEINFO

ETHTOOL_MSG_MODULE_EEPROM_GET

ETHTOOL_GMODULEEEPROM

ETHTOOL_MSG_MODULE_EEPROM_GET

ETHTOOL_GEEE

ETHTOOL_MSG_EEE_GET

ETHTOOL_SEEE

ETHTOOL_MSG_EEE_SET

ETHTOOL_GRSSH

ETHTOOL_MSG_RSS_GET

ETHTOOL_SRSSH

n/a

ETHTOOL_GTUNABLE

n/a

ETHTOOL_STUNABLE

n/a

ETHTOOL_GPHYSTATS

n/a

ETHTOOL_PERQUEUE

n/a

ETHTOOL_GLINKSETTINGS

ETHTOOL_MSG_LINKINFO_GET ETHTOOL_MSG_LINKMODES_GET

ETHTOOL_SLINKSETTINGS

ETHTOOL_MSG_LINKINFO_SET ETHTOOL_MSG_LINKMODES_SET

ETHTOOL_PHY_GTUNABLE

n/a

ETHTOOL_PHY_STUNABLE

n/a

ETHTOOL_GFECPARAM

ETHTOOL_MSG_FEC_GET

ETHTOOL_SFECPARAM

ETHTOOL_MSG_FEC_SET

n/a

ETHTOOL_MSG_CABLE_TEST_ACT

n/a

ETHTOOL_MSG_CABLE_TEST_TDR_ACT

n/a

ETHTOOL_MSG_TUNNEL_INFO_GET

n/a

ETHTOOL_MSG_PHC_VCLOCKS_GET

n/a

ETHTOOL_MSG_MODULE_GET

n/a

ETHTOOL_MSG_MODULE_SET

n/a

ETHTOOL_MSG_PLCA_GET_CFG

n/a

ETHTOOL_MSG_PLCA_SET_CFG

n/a

ETHTOOL_MSG_PLCA_GET_STATUS

n/a

ETHTOOL_MSG_MM_GET

n/a

ETHTOOL_MSG_MM_SET

n/a

ETHTOOL_MSG_MODULE_FW_FLASH_ACT

n/a

ETHTOOL_MSG_PHY_GET

`ETHTOOL_A_BITSET_NOMASK`	flag	no mask, only a list
`ETHTOOL_A_BITSET_SIZE`	u32	number of significant bits
`ETHTOOL_A_BITSET_VALUE`	binary	bitmap of bit values
`ETHTOOL_A_BITSET_MASK`	binary	bitmap of valid bits

`_GET`	userspace request to retrieve data
`_SET`	userspace request to set data
`_ACT`	userspace request to perform an action
`_GET_REPLY`	kernel reply to a `GET` request
`_SET_REPLY`	kernel reply to a `SET` request
`_ACT_REPLY`	kernel reply to an `ACT` request
`_NTF`	kernel notification

`ETHTOOL_MSG_STRSET_GET`	get string set
`ETHTOOL_MSG_LINKINFO_GET`	get link settings
`ETHTOOL_MSG_LINKINFO_SET`	set link settings
`ETHTOOL_MSG_LINKMODES_GET`	get link modes info
`ETHTOOL_MSG_LINKMODES_SET`	set link modes info
`ETHTOOL_MSG_LINKSTATE_GET`	get link state
`ETHTOOL_MSG_DEBUG_GET`	get debugging settings
`ETHTOOL_MSG_DEBUG_SET`	set debugging settings
`ETHTOOL_MSG_WOL_GET`	get wake-on-lan settings
`ETHTOOL_MSG_WOL_SET`	set wake-on-lan settings
`ETHTOOL_MSG_FEATURES_GET`	get device features
`ETHTOOL_MSG_FEATURES_SET`	set device features
`ETHTOOL_MSG_PRIVFLAGS_GET`	get private flags
`ETHTOOL_MSG_PRIVFLAGS_SET`	set private flags
`ETHTOOL_MSG_RINGS_GET`	get ring sizes
`ETHTOOL_MSG_RINGS_SET`	set ring sizes
`ETHTOOL_MSG_CHANNELS_GET`	get channel counts
`ETHTOOL_MSG_CHANNELS_SET`	set channel counts
`ETHTOOL_MSG_COALESCE_GET`	get coalescing parameters
`ETHTOOL_MSG_COALESCE_SET`	set coalescing parameters
`ETHTOOL_MSG_PAUSE_GET`	get pause parameters
`ETHTOOL_MSG_PAUSE_SET`	set pause parameters
`ETHTOOL_MSG_EEE_GET`	get EEE settings
`ETHTOOL_MSG_EEE_SET`	set EEE settings
`ETHTOOL_MSG_TSINFO_GET`	get timestamping info
`ETHTOOL_MSG_CABLE_TEST_ACT`	action start cable test
`ETHTOOL_MSG_CABLE_TEST_TDR_ACT`	action start raw TDR cable test
`ETHTOOL_MSG_TUNNEL_INFO_GET`	get tunnel offload info
`ETHTOOL_MSG_FEC_GET`	get FEC settings
`ETHTOOL_MSG_FEC_SET`	set FEC settings
`ETHTOOL_MSG_MODULE_EEPROM_GET`	read SFP module EEPROM
`ETHTOOL_MSG_STATS_GET`	get standard statistics
`ETHTOOL_MSG_PHC_VCLOCKS_GET`	get PHC virtual clocks info
`ETHTOOL_MSG_MODULE_SET`	set transceiver module parameters
`ETHTOOL_MSG_MODULE_GET`	get transceiver module parameters
`ETHTOOL_MSG_PSE_SET`	set PSE parameters
`ETHTOOL_MSG_PSE_GET`	get PSE parameters
`ETHTOOL_MSG_RSS_GET`	get RSS settings
`ETHTOOL_MSG_PLCA_GET_CFG`	get PLCA RS parameters
`ETHTOOL_MSG_PLCA_SET_CFG`	set PLCA RS parameters
`ETHTOOL_MSG_PLCA_GET_STATUS`	get PLCA RS status
`ETHTOOL_MSG_MM_GET`	get MAC merge layer state
`ETHTOOL_MSG_MM_SET`	set MAC merge layer parameters
`ETHTOOL_MSG_MODULE_FW_FLASH_ACT`	flash transceiver module firmware

`ETHTOOL_MSG_STRSET_GET_REPLY`	string set contents
`ETHTOOL_MSG_LINKINFO_GET_REPLY`	link settings
`ETHTOOL_MSG_LINKINFO_NTF`	link settings notification
`ETHTOOL_MSG_LINKMODES_GET_REPLY`	link modes info
`ETHTOOL_MSG_LINKMODES_NTF`	link modes notification
`ETHTOOL_MSG_LINKSTATE_GET_REPLY`	link state info
`ETHTOOL_MSG_DEBUG_GET_REPLY`	debugging settings
`ETHTOOL_MSG_DEBUG_NTF`	debugging settings notification
`ETHTOOL_MSG_WOL_GET_REPLY`	wake-on-lan settings
`ETHTOOL_MSG_WOL_NTF`	wake-on-lan settings notification
`ETHTOOL_MSG_FEATURES_GET_REPLY`	device features
`ETHTOOL_MSG_FEATURES_SET_REPLY`	optional reply to FEATURES_SET
`ETHTOOL_MSG_FEATURES_NTF`	netdev features notification
`ETHTOOL_MSG_PRIVFLAGS_GET_REPLY`	private flags
`ETHTOOL_MSG_PRIVFLAGS_NTF`	private flags
`ETHTOOL_MSG_RINGS_GET_REPLY`	ring sizes
`ETHTOOL_MSG_RINGS_NTF`	ring sizes
`ETHTOOL_MSG_CHANNELS_GET_REPLY`	channel counts
`ETHTOOL_MSG_CHANNELS_NTF`	channel counts
`ETHTOOL_MSG_COALESCE_GET_REPLY`	coalescing parameters
`ETHTOOL_MSG_COALESCE_NTF`	coalescing parameters
`ETHTOOL_MSG_PAUSE_GET_REPLY`	pause parameters
`ETHTOOL_MSG_PAUSE_NTF`	pause parameters
`ETHTOOL_MSG_EEE_GET_REPLY`	EEE settings
`ETHTOOL_MSG_EEE_NTF`	EEE settings
`ETHTOOL_MSG_TSINFO_GET_REPLY`	timestamping info
`ETHTOOL_MSG_CABLE_TEST_NTF`	Cable test results
`ETHTOOL_MSG_CABLE_TEST_TDR_NTF`	Cable test TDR results
`ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY`	tunnel offload info
`ETHTOOL_MSG_FEC_GET_REPLY`	FEC settings
`ETHTOOL_MSG_FEC_NTF`	FEC settings
`ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY`	read SFP module EEPROM
`ETHTOOL_MSG_STATS_GET_REPLY`	standard statistics
`ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY`	PHC virtual clocks info
`ETHTOOL_MSG_MODULE_GET_REPLY`	transceiver module parameters
`ETHTOOL_MSG_PSE_GET_REPLY`	PSE parameters
`ETHTOOL_MSG_RSS_GET_REPLY`	RSS settings
`ETHTOOL_MSG_PLCA_GET_CFG_REPLY`	PLCA RS parameters
`ETHTOOL_MSG_PLCA_GET_STATUS_REPLY`	PLCA RS status
`ETHTOOL_MSG_PLCA_NTF`	PLCA RS parameters
`ETHTOOL_MSG_MM_GET_REPLY`	MAC merge layer status
`ETHTOOL_MSG_MODULE_FW_FLASH_NTF`	transceiver module flash updates

`ETHTOOL_A_STRSET_HEADER`			nested	request header
`ETHTOOL_A_STRSET_STRINGSETS`			nested	string set to request
	`ETHTOOL_A_STRINGSETS_STRINGSET+`		nested	one string set
		`ETHTOOL_A_STRINGSET_ID`	u32	set id

`ETHTOOL_A_LINKINFO_HEADER`	nested	reply header
`ETHTOOL_A_LINKINFO_PORT`	u8	physical port
`ETHTOOL_A_LINKINFO_PHYADDR`	u8	phy MDIO address
`ETHTOOL_A_LINKINFO_TP_MDIX`	u8	MDI(-X) status
`ETHTOOL_A_LINKINFO_TP_MDIX_CTRL`	u8	MDI(-X) control
`ETHTOOL_A_LINKINFO_TRANSCEIVER`	u8	transceiver

`ETHTOOL_A_LINKMODES_HEADER`	nested	reply header
`ETHTOOL_A_LINKMODES_AUTONEG`	u8	autonegotiation status
`ETHTOOL_A_LINKMODES_OURS`	bitset	advertised link modes
`ETHTOOL_A_LINKMODES_PEER`	bitset	partner link modes
`ETHTOOL_A_LINKMODES_SPEED`	u32	link speed (Mb/s)
`ETHTOOL_A_LINKMODES_DUPLEX`	u8	duplex mode
`ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`	u8	Master/slave port mode
`ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE`	u8	Master/slave port state
`ETHTOOL_A_LINKMODES_RATE_MATCHING`	u8	PHY rate matching

`ETHTOOL_A_LINKSTATE_HEADER`	nested	reply header
`ETHTOOL_A_LINKSTATE_LINK`	bool	link state (up/down)
`ETHTOOL_A_LINKSTATE_SQI`	u32	Current Signal Quality Index
`ETHTOOL_A_LINKSTATE_SQI_MAX`	u32	Max support SQI value
`ETHTOOL_A_LINKSTATE_EXT_STATE`	u8	link extended state
`ETHTOOL_A_LINKSTATE_EXT_SUBSTATE`	u8	link extended substate
`ETHTOOL_A_LINKSTATE_EXT_DOWN_CNT`	u32	count of link down events

`ETHTOOL_LINK_EXT_STATE_AUTONEG`	States relating to the autonegotiation or issues therein
`ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE`	Failure during link training
`ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH`	Logical mismatch in physical coding sublayer or forward error correction sublayer
`ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY`	Signal integrity issues
`ETHTOOL_LINK_EXT_STATE_NO_CABLE`	No cable connected
`ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE`	Failure is related to cable, e.g., unsupported cable
`ETHTOOL_LINK_EXT_STATE_EEPROM_ISSUE`	Failure is related to EEPROM, e.g., failure during reading or parsing the data
`ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE`	Failure during calibration algorithm
`ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED`	The hardware is not able to provide the power required from cable or module
`ETHTOOL_LINK_EXT_STATE_OVERHEAT`	The module is overheated
`ETHTOOL_LINK_EXT_STATE_MODULE`	Transceiver module issue

`ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED`	Peer side is down
`ETHTOOL_LINK_EXT_SUBSTATE_AN_ACK_NOT_RECEIVED`	Ack not received from peer side
`ETHTOOL_LINK_EXT_SUBSTATE_AN_NEXT_PAGE_EXCHANGE_FAILED`	Next page exchange failed
`ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED_FORCE_MODE`	Peer side is down during force mode or there is no agreement of speed
`ETHTOOL_LINK_EXT_SUBSTATE_AN_FEC_MISMATCH_DURING_OVERRIDE`	Forward error correction modes in both sides are mismatched
`ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_HCD`	No Highest Common Denominator

`ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_FRAME_LOCK_NOT_ACQUIRED`	Frames were not recognized, the lock failed
`ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_INHIBIT_TIMEOUT`	The lock did not occur before timeout
`ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_PARTNER_DID_NOT_SET_RECEIVER_READY`	Peer side did not send ready signal after training process
`ETHTOOL_LINK_EXT_SUBSTATE_LT_REMOTE_FAULT`	Remote side is not ready yet

`ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_BLOCK_LOCK`	Physical coding sublayer was not locked in first phase - block lock
`ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_AM_LOCK`	Physical coding sublayer was not locked in second phase - alignment markers lock
`ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_GET_ALIGN_STATUS`	Physical coding sublayer did not get align status
`ETHTOOL_LINK_EXT_SUBSTATE_LLM_FC_FEC_IS_NOT_LOCKED`	FC forward error correction is not locked
`ETHTOOL_LINK_EXT_SUBSTATE_LLM_RS_FEC_IS_NOT_LOCKED`	RS forward error correction is not locked

`ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS`	Large number of physical errors
`ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE`	The system attempted to operate the cable at a rate that is not formally supported, which led to signal integrity issues
`ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST`	The external clock signal for SerDes is too weak or unavailable.
`ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS`	The received signal for SerDes is too weak because analog loss of signal.

`ETHTOOL_LINK_EXT_SUBSTATE_CI_UNSUPPORTED_CABLE`	Unsupported cable
`ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE`	Cable test failure

`ETHTOOL_A_DEBUG_HEADER`	nested	reply header
`ETHTOOL_A_DEBUG_MSGMASK`	bitset	message mask

`ETHTOOL_A_WOL_HEADER`	nested	reply header
`ETHTOOL_A_WOL_MODES`	bitset	mask of enabled WoL modes
`ETHTOOL_A_WOL_SOPASS`	binary	SecureOn(tm) password

`ETHTOOL_A_FEATURES_HEADER`	nested	reply header
`ETHTOOL_A_FEATURES_HW`	bitset	dev->hw_features
`ETHTOOL_A_FEATURES_WANTED`	bitset	dev->wanted_features
`ETHTOOL_A_FEATURES_ACTIVE`	bitset	dev->features
`ETHTOOL_A_FEATURES_NOCHANGE`	bitset	NETIF_F_NEVER_CHANGE

`ETHTOOL_A_PRIVFLAGS_HEADER`	nested	reply header
`ETHTOOL_A_PRIVFLAGS_FLAGS`	bitset	private flags

`ETHTOOL_A_RINGS_HEADER`	nested	reply header
`ETHTOOL_A_RINGS_RX_MAX`	u32	max size of RX ring
`ETHTOOL_A_RINGS_RX_MINI_MAX`	u32	max size of RX mini ring
`ETHTOOL_A_RINGS_RX_JUMBO_MAX`	u32	max size of RX jumbo ring
`ETHTOOL_A_RINGS_TX_MAX`	u32	max size of TX ring
`ETHTOOL_A_RINGS_RX`	u32	size of RX ring
`ETHTOOL_A_RINGS_RX_MINI`	u32	size of RX mini ring
`ETHTOOL_A_RINGS_RX_JUMBO`	u32	size of RX jumbo ring
`ETHTOOL_A_RINGS_TX`	u32	size of TX ring
`ETHTOOL_A_RINGS_RX_BUF_LEN`	u32	size of buffers on the ring
`ETHTOOL_A_RINGS_TCP_DATA_SPLIT`	u8	TCP header / data split
`ETHTOOL_A_RINGS_CQE_SIZE`	u32	Size of TX/RX CQE
`ETHTOOL_A_RINGS_TX_PUSH`	u8	flag of TX Push mode
`ETHTOOL_A_RINGS_RX_PUSH`	u8	flag of RX Push mode
`ETHTOOL_A_RINGS_TX_PUSH_BUF_LEN`	u32	size of TX push buffer
`ETHTOOL_A_RINGS_TX_PUSH_BUF_LEN_MAX`	u32	max size of TX push buffer

`ETHTOOL_A_CHANNELS_HEADER`	nested	reply header
`ETHTOOL_A_CHANNELS_RX_MAX`	u32	max receive channels
`ETHTOOL_A_CHANNELS_TX_MAX`	u32	max transmit channels
`ETHTOOL_A_CHANNELS_OTHER_MAX`	u32	max other channels
`ETHTOOL_A_CHANNELS_COMBINED_MAX`	u32	max combined channels
`ETHTOOL_A_CHANNELS_RX_COUNT`	u32	receive channel count
`ETHTOOL_A_CHANNELS_TX_COUNT`	u32	transmit channel count
`ETHTOOL_A_CHANNELS_OTHER_COUNT`	u32	other channel count
`ETHTOOL_A_CHANNELS_COMBINED_COUNT`	u32	combined channel count

`ETHTOOL_A_COALESCE_HEADER`	nested	reply header
`ETHTOOL_A_COALESCE_RX_USECS`	u32	delay (us), normal Rx
`ETHTOOL_A_COALESCE_RX_MAX_FRAMES`	u32	max packets, normal Rx
`ETHTOOL_A_COALESCE_RX_USECS_IRQ`	u32	delay (us), Rx in IRQ
`ETHTOOL_A_COALESCE_RX_MAX_FRAMES_IRQ`	u32	max packets, Rx in IRQ
`ETHTOOL_A_COALESCE_TX_USECS`	u32	delay (us), normal Tx
`ETHTOOL_A_COALESCE_TX_MAX_FRAMES`	u32	max packets, normal Tx
`ETHTOOL_A_COALESCE_TX_USECS_IRQ`	u32	delay (us), Tx in IRQ
`ETHTOOL_A_COALESCE_TX_MAX_FRAMES_IRQ`	u32	IRQ packets, Tx in IRQ
`ETHTOOL_A_COALESCE_STATS_BLOCK_USECS`	u32	delay of stats update
`ETHTOOL_A_COALESCE_USE_ADAPTIVE_RX`	bool	adaptive Rx coalesce
`ETHTOOL_A_COALESCE_USE_ADAPTIVE_TX`	bool	adaptive Tx coalesce
`ETHTOOL_A_COALESCE_PKT_RATE_LOW`	u32	threshold for low rate
`ETHTOOL_A_COALESCE_RX_USECS_LOW`	u32	delay (us), low Rx
`ETHTOOL_A_COALESCE_RX_MAX_FRAMES_LOW`	u32	max packets, low Rx
`ETHTOOL_A_COALESCE_TX_USECS_LOW`	u32	delay (us), low Tx
`ETHTOOL_A_COALESCE_TX_MAX_FRAMES_LOW`	u32	max packets, low Tx
`ETHTOOL_A_COALESCE_PKT_RATE_HIGH`	u32	threshold for high rate
`ETHTOOL_A_COALESCE_RX_USECS_HIGH`	u32	delay (us), high Rx
`ETHTOOL_A_COALESCE_RX_MAX_FRAMES_HIGH`	u32	max packets, high Rx
`ETHTOOL_A_COALESCE_TX_USECS_HIGH`	u32	delay (us), high Tx
`ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`	u32	max packets, high Tx
`ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`	u32	rate sampling interval
`ETHTOOL_A_COALESCE_USE_CQE_TX`	bool	timer reset mode, Tx
`ETHTOOL_A_COALESCE_USE_CQE_RX`	bool	timer reset mode, Rx
`ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES`	u32	max aggr size, Tx
`ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES`	u32	max aggr packets, Tx
`ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS`	u32	time (us), aggr, Tx
`ETHTOOL_A_COALESCE_RX_PROFILE`	nested	profile of DIM, Rx
`ETHTOOL_A_COALESCE_TX_PROFILE`	nested	profile of DIM, Tx

`ETHTOOL_A_PAUSE_HEADER`	nested	request header
`ETHTOOL_A_PAUSE_STATS_SRC`	u32	source of statistics

`ETHTOOL_A_EEE_HEADER`	nested	request header
`ETHTOOL_A_EEE_MODES_OURS`	bool	supported/advertised modes
`ETHTOOL_A_EEE_MODES_PEER`	bool	peer advertised link modes
`ETHTOOL_A_EEE_ACTIVE`	bool	EEE is actively used
`ETHTOOL_A_EEE_ENABLED`	bool	EEE is enabled
`ETHTOOL_A_EEE_TX_LPI_ENABLED`	bool	Tx lpi enabled
`ETHTOOL_A_EEE_TX_LPI_TIMER`	u32	Tx lpi timeout (in us)

`ETHTOOL_A_TSINFO_HEADER`	nested	request header
`ETHTOOL_A_TSINFO_TIMESTAMPING`	bitset	SO_TIMESTAMPING flags
`ETHTOOL_A_TSINFO_TX_TYPES`	bitset	supported Tx types
`ETHTOOL_A_TSINFO_RX_FILTERS`	bitset	supported Rx filters
`ETHTOOL_A_TSINFO_PHC_INDEX`	u32	PTP hw clock index
`ETHTOOL_A_TSINFO_STATS`	nested	HW timestamping statistics

`ETHTOOL_A_TS_STAT_TX_PKTS`	uint	Packets with Tx HW timestamps
`ETHTOOL_A_TS_STAT_TX_LOST`	uint	Tx HW timestamp not arrived count
`ETHTOOL_A_TS_STAT_TX_ERR`	uint	HW error request Tx timestamp count

`ETHTOOL_A_CABLE_TEST_HEADER`			nested	reply header
`ETHTOOL_A_CABLE_TEST_STATUS`			u8	completed
`ETHTOOL_A_CABLE_TEST_NTF_NEST`			nested	all the results
	`ETHTOOL_A_CABLE_NEST_RESULT`		nested	cable test result
		`ETHTOOL_A_CABLE_RESULTS_PAIR`	u8	pair number
		`ETHTOOL_A_CABLE_RESULTS_CODE`	u8	result code
	`ETHTOOL_A_CABLE_NEST_RESULT`		nested	cable test results
		`ETHTOOL_A_CABLE_RESULTS_PAIR`	u8	pair number
		`ETHTOOL_A_CABLE_RESULTS_CODE`	u8	result code
		`ETHTOOL_A_CABLE_RESULT_SRC`	u32	information source
	`ETHTOOL_A_CABLE_NEST_FAULT_LENGTH`		nested	cable length
		`ETHTOOL_A_CABLE_FAULT_LENGTH_PAIR`	u8	pair number
		`ETHTOOL_A_CABLE_FAULT_LENGTH_CM`	u32	length in cm
		`ETHTOOL_A_CABLE_FAULT_LENGTH_SRC`	u32	information source

`ETHTOOL_A_CABLE_TEST_TDR_HEADER`		nested	reply header
`ETHTOOL_A_CABLE_TEST_TDR_CFG`		nested	test configuration
	`ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE`	u32	first data distance
	`ETHTOOL_A_CABLE_STEP_LAST_DISTANCE`	u32	last data distance
	`ETHTOOL_A_CABLE_STEP_STEP_DISTANCE`	u32	distance of each step
	`ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR`	u8	pair to test

`ETHTOOL_A_TUNNEL_INFO_HEADER`				nested	reply header
`ETHTOOL_A_TUNNEL_INFO_UDP_PORTS`				nested	all UDP port tables
	`ETHTOOL_A_TUNNEL_UDP_TABLE`			nested	one UDP port table
		`ETHTOOL_A_TUNNEL_UDP_TABLE_SIZE`		u32	max size of the table
		`ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES`		bitset	tunnel types which table can hold
		`ETHTOOL_A_TUNNEL_UDP_TABLE_ENTRY`		nested	offloaded UDP port
			`ETHTOOL_A_TUNNEL_UDP_ENTRY_PORT`	be16	UDP port
			`ETHTOOL_A_TUNNEL_UDP_ENTRY_TYPE`	u32	tunnel type

`ETHTOOL_A_FEC_HEADER`	nested	request header
`ETHTOOL_A_FEC_MODES`	bitset	configured modes
`ETHTOOL_A_FEC_AUTO`	bool	FEC mode auto selection
`ETHTOOL_A_FEC_ACTIVE`	u32	index of active FEC mode
`ETHTOOL_A_FEC_STATS`	nested	FEC statistics

`ETHTOOL_A_MODULE_EEPROM_HEADER`	nested	request header
`ETHTOOL_A_MODULE_EEPROM_OFFSET`	u32	offset within a page
`ETHTOOL_A_MODULE_EEPROM_LENGTH`	u32	amount of bytes to read
`ETHTOOL_A_MODULE_EEPROM_PAGE`	u8	page number
`ETHTOOL_A_MODULE_EEPROM_BANK`	u8	bank number
`ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS`	u8	page I2C address